From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Kjell Chris. Flor" <kjell@mastercad.se>
Date: Fri, 21 Mar 2003 22:38:17 +0000
Subject: Re: [LARTC] (no subject)
Message-Id: <marc-lartc-104828639418340@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-98373938216902@msgid-missing>
In-Reply-To: <marc-lartc-98373938216902@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

> > Hi
> >
> > In the introduction of IMQ ( http://luxik.cdi.cz/~patrick/imq/ )
> > it sais:
> >
> > Quote start.
> > "This allows you to treat network devices
> > as classes and distribute bandwidth among
> > them as well as doing real ingress traffic
> > control using egress qdiscs"
> > quote stop.
> >
> > Where and how exactly do I tell that a HTB
> > class should use which phy. dev.?
> You can do this with iptables + fw filter.  Mark the packets coming from
each
> interface with a different mark and put the packets with the fw filter in
> it's own class.

But why do I need IMQ for this?

Kjell


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/