From: Simone Leggio <tkt_legg@cs.helsinki.fi>
To: lartc@vger.kernel.org
Subject: [LARTC] Changing Linux traffic control parameters on the fly
Date: Fri, 28 Mar 2003 15:12:14 +0000 [thread overview]
Message-ID: <marc-lartc-104886443613956@msgid-missing> (raw)
Hi all,
I'm executing some experiments in a test network and I have a doubt. It
is possible to change linux traffic control parameters (say, for
example, the bandwidth allocated to a flow, its ceiling rate in a HTB
scheduler, its weight parameter in a CBQ scheduler and so on) while the
flow is actually traversing a router?
An example: let's assume that a certain class has allocated a bandwidth
of 500 kbit/sec. Can I change, say after 10 seconds, while the flow is
still active, the bandwidth allocated to that class to 1 Mbit/sec?
I know there is the command tc qdisc change with which I can change the
parameters for a qdisc, but how to use it? Launching after 10 seconds
another tc script?
Any ideas?
Thank you,
Simone.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2003-03-28 15:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-28 15:12 Simone Leggio [this message]
2003-03-29 15:28 ` [LARTC] Changing Linux traffic control parameters on the fly Stef Coene
2003-03-29 15:28 ` Stef Coene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-104886443613956@msgid-missing \
--to=tkt_legg@cs.helsinki.fi \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox