From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michael Yuan <yuan@ieee.org>
Date: Tue, 06 May 2003 12:07:34 +0000
Subject: Re: [LARTC] u32 filter
Message-Id: <marc-lartc-105222291908406@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-103920065528929@msgid-missing>
In-Reply-To: <marc-lartc-103920065528929@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Looking at the LARTC document on page 65, the sample htb configuration,
it should be the first one.

cheers
yuan

On Tue, 2003-05-06 at 19:10, Vitor Carlos Flausino wrote:
> Hi all.
> 
> I have the following queue:
> 
> 
> tc qdisc add dev eth0 root handle 1:0 htb default 15
> 
> 
> tc class add dev eth0 parent 1:0 classid 1:1 htb rate 100mbit ceil 100mbit
> 
> tc class add dev eth0 parent 1:1 classid 1:7 htb rate 64kbit ceil 64kbit
> tc class add dev eth0 parent 1:1 classid 1:15 htb rate 102336kbit ceil 
> 100mbit
> 
> tc qdisc add dev eth0 parent 1:7 handle 10:0 sfq perturb 10
> tc qdisc add dev eth0 parent 1:15 handle 20:0 sfq perturb 10
> 
> Now, my question is, the filter should be:
> 
> tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip 
> 57.227.234.22 flowid 1:7
> 
> or,
> 
> tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip 
> 57.227.234.22 flowid 10:0
> 
> ?
> 
> What about the default?
> 
> Thankx,
> -vcf
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/