From mboxrd@z Thu Jan 1 00:00:00 1970 From: Szymon Miotk Date: Wed, 07 May 2003 07:44:52 +0000 Subject: [LARTC] Problem with third link in multiple uplink configuration Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello! I have access server with 4 uplinks (nice, huh?). I ran RedHat 7.3. Yesterday I did an upgrade to RedHat 9. After upgrade Linux says the third link is bad: # ip route show 2.2.2.0/30 dev eth2 scope link src 2.2.2.2 4.4.4.0/30 dev eth4 scope link src 4.4.4.4 3.3.3.0/29 dev eth3 scope link src 3.3.3.3 1.1.1.0/28 dev eth1 scope link src 1.1.1.1 10.1.1.0/24 dev eth0 scope link 10.1.2.0/24 dev eth0 proto kernel scope link src 10.1.2.1 10.1.3.0/24 dev eth0 proto kernel scope link src 10.1.3.1 127.0.0.0/8 dev lo scope link default nexthop via 1.1.1.254 dev eth1 weight 11 nexthop via 3.3.3.254 dev eth3 weight 20 nexthop via 2.2.2.254 dev eth2 weight 10 dead pervasive nexthop via 4.4.4.254 dev eth4 weight 11 When I change the order of links in this command: ip route add default scope global \ nexthop via 1.1.1.254 dev eth1 weight 11 \ nexthop via 3.3.3.254 dev eth3 weight 20 \ nexthop via 2.2.2.254 dev eth2 weight 10 \ nexthop via 4.4.4.254 dev eth4 weight 11 it's always the third link that is dead! Anybody have a clue? Szymon Miotk _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/