Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: "sun reflex4" <sunreflex4@hotmail.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] incoming traffic??
Date: Sun, 11 May 2003 10:13:08 +0000	[thread overview]
Message-ID: <marc-lartc-105264809431883@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105258341931128@msgid-missing>

well, I have 2 interfaces, but I didn't get what you mean. You say I use one 
for incoming and one for outgoing? can this then be achieved only with 
iptables and tc?

Best greetings

>From: "hare ram" <hareram@sol.net.in>
>Reply-To: "hare ram" <hareram@sol.net.in>
>To: <lartc@mailman.ds9a.nl>
>Subject: Re: [LARTC] incoming traffic??
>Date: Sun, 11 May 2003 10:21:16 +0530
>
>Hi
>
>AFAIK,
>
>If you have Two interfaces, better you do
>up control in one interface and down in one interface
>this can be achived, even i have tested, not yet kept on live, still some
>more testing iam doing with my test setup
>
>But if you have looking for up+down= total b/w
>people in this Group recomending IMQ, but i have never seen any of the post
>in this group this IMQ successfully running, may be it may be not working
>for me( since iam using bridge)
>
>But you can try, with the help of stef and Patrick help
>
>hare
>----- Original Message -----
>From: "Jose Luis Domingo Lopez" <lartc@24x7linux.com>
>To: <lartc@mailman.ds9a.nl>
>Sent: Saturday, May 10, 2003 11:35 PM
>Subject: Re: [LARTC] incoming traffic??
>
>
> > On Saturday, 10 May 2003, at 16:15:00 +0000,
> > sun reflex4 wrote:
> >
> > > I want to classify incoming traffic and then put them in HTB queues, 
>is
> > > that possible with tc (and/or iptables)? and when yes, which chain
>should I
> > > use: PREROUTING, or INPUT?
> > >
> > You should patch your kernel to support IMQ device and configure it, as
> > has been said several times on this list. Check the archives.
> >
> > If you are configuring Linux traffic shaping in a router for a whole net
> > behind it, you can avoid IMQ and shapa incoming traffic in the inner
> > network card, shaping outgoing traffic to your internal network.
> >
> > IP packets travel through the operating system stack following a well
> > defined path, that you can check at:
> > http://www.docum.org/stef.coene/qos/kptd/
> >
> > Regards.
> >
> > --
> > Jose Luis Domingo Lopez
> > Linux Registered User #189436     Debian Linux Sid (Linux 2.5.69)
> > _______________________________________________
> > LARTC mailing list / LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> >
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?pageþatures/virus

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

  parent reply	other threads:[~2003-05-11 10:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-05-10 16:15 [LARTC] incoming traffic?? sun reflex4
2003-05-10 18:05 ` Jose Luis Domingo Lopez
2003-05-11  4:49 ` hare ram
2003-05-11 10:13 ` sun reflex4 [this message]
2003-05-11 12:37 ` Graste
  -- strict thread matches above, loose matches on Subject: below --
2005-10-04  9:33 [LARTC] Incoming traffic? Dominik Werder
2005-10-04 10:00 ` Andreas Klauer
2005-10-04 13:08 ` Edward Smith
2005-10-04 17:53 ` Carl-Daniel Hailfinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-105264809431883@msgid-missing \
    --to=sunreflex4@hotmail.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox