RE: [LARTC] Limit bandwidth per client

["David Reoch" <dave@warpspeed.net>]

That is the best, detailed, straight-forward howto on tc I've ever seen!
(There are probablly others out there, and no offense to authors of any
that I just haven't seen).  Thanks!

I have been off and on trying to get my squid transparent proxy/cache
server to do tc for me, but it just doesn't seem to work, and I wonder
if you can offer any advice.

My network looks just like you've described below, except that your
'router1' is my 'transparent cache', running as a bridge, where eth0 and
eth1 are bridge interfaces (br0).

I am beginning to draw the conclusion that I cannot do tc with a bridge,
and that I must route.  Do you have any suggestions?

Thanks,
dave

-----Original Message-----
From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl]
On Behalf Of Stuart Mackintosh
Sent: Monday, May 12, 2003 10:08 AM
To: lartc@mailman.ds9a.nl
Subject: [LARTC] Limit bandwidth per client


Hi all,

I have an installation where each user on subnet 192.168.1.0/24 is
connected via a multiplexer. 
The problem is that if any client uses more than about 48Kb/s, the
multiplexer crashes. 

I need to limit each client to under this rate, say 32Kb/s. I have seen
examples on creating a class per host but is there a simple way of
saying "any host from 192.168.1.0/24" so I dont have 253 rules?

Many thanks.

stuart

-- 

 | http://www.opusvl.com 
 | T: 08717 50 40 02
 | F: 08717 50 40 03
 | E: sm@opusvl.com 
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/