From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Leblond Date: Tue, 13 May 2003 15:58:52 +0000 Subject: [LARTC] eql not teql problem MIME-Version: 1 Content-Type: multipart/mixed; boundary="=-cfQ5nvHvY6tj1jpUKaVo" Message-Id: List-Id: To: lartc@vger.kernel.org --=-cfQ5nvHvY6tj1jpUKaVo Content-Type: text/plain Content-Transfer-Encoding: quoted-printable > 1. Slave devices MUST be active devices, i.e., they must raise the tbusy > signal and generate EOI events. If you want to equalize virtual > devices like tunnels, use a normal eql device. following htis advics I try to use eql to equalize my two gre tunnel. Things goes out very well but I'm not able to receive anything. All arrive to the tunnel interface but nothing arrive on the eql interface. Has somebody any experience with such a setup ? Any help appreciated --=20 Eric Leblond Regit.org --=-cfQ5nvHvY6tj1jpUKaVo Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQA+wRY8nxA7CdMWjzIRAt8NAJ9a0ofXSaxg58jgxteps/+b4MvbpgCdFXaM jlo6K5Aj5gVu4FYcL4eoEZo= =3oCM -----END PGP SIGNATURE----- --=-cfQ5nvHvY6tj1jpUKaVo-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/