[LARTC] 4 Users no Bandwidth Borrowing

["Osgaldo Suanzes" <osgaldo@tiscali.es>]

Hi,

    How can I assign 4 users  bandwidth, and not allow them to borrow
bandwidth to others when someone is not using it?

    As you see below I tried to assign each class the same ceil like its
rate,
    It didnt worked.  but Im not sure if  this is the way to go..... Maybe I
did something wrong any ideas?

#tc qdisc del dev eth1 root

#tc qdisc add dev eth1 root handle 1: htb

#tc class add dev eth1 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps

#tc class add dev eth1 parent 1:1 classid 1:10 htb rate 15kbps ceil 15kbps
#tc class add dev eth1 parent 1:1 classid 1:11 htb rate 25kbps ceil 25kbps
#tc class add dev eth1 parent 1:1 classid 1:12 htb rate 10ps ceil 10ps
#tc class add dev eth1 parent 1:1 classid 1:13 htb rate 50kbps ceil 50kbps

#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.2 flowid 1:10
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.3 flowid 1:11
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.4 flowid 1:12
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src
10.3.0.5 flowid 1:13




        Regards Osgaldo.

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/