Re: [LARTC] CBQ and HTB Support

["Osgaldo Suanzes" <osgaldo@tiscali.es>]

Hi Fahad.

    Its very easy, Download (if you dont have it allready) Linux Kernel
2.4.20
get it here:
http://www.kernel.org/pub/linux/kernel/v2.4/linux-2.4.20.tar.gz

 and Uncompress at /usr/src with :
#tar zxvf Linux-kernel-2.4.20

Install  Woody Package Iproute2 (on Debian/linux)
#apt-get install iproute

Replace your command /sbin/tc
with the one from Stefs page
http://www.docum.org/stef.coene/qos/download/tc
->Which has htb3 support compiled within

Patch the kernel with the following : BUT ONLY!! if you want to make use of
the ESFQ:
Youe can get it here  http://www.ssi.bg/~alex/esfq/esfq-0.2-2.4.18.tar.gz

Choos the following options in the kernel Menue :

Networking options  --->
 Kernel/User netlink socket
 Network packet filtering (replaces ipchains)
IP: Netfilter Configuration  --->
 IP tables support (required for filtering/masq/NAT)
 LENGTH match support
 MARK target support
QoS and/or fair queueing  --->
  SELECT EVERYTHING HERE

        Then do a
#make modules;make modules_install;make dep;make clean;make bzlilo

    reboot and your done!

            Good luck

                    Osgaldo


----- Original Message -----
From: "Fahad" <fahad@netlogicbroadband.com>
To: "Blagoy Genadiev" <blagoy.genadiev@wizcom.bg>; <lartc@mailman.ds9a.nl>
Sent: Thursday, May 22, 2003 5:11 PM
Subject: Re: [LARTC] CBQ and HTB Support


> Any straight forward procedure or any website where i can find necessary
> procedure to recompile , which modules to select etc ...
>
>
> ----- Original Message -----
> From: "Blagoy Genadiev" <blagoy.genadiev@wizcom.bg>
> To: "Fahad" <fahad@netlogicbroadband.com>; <lartc@mailman.ds9a.nl>
> Sent: Thursday, May 22, 2003 8:01 PM
> Subject: RE: [LARTC] CBQ and HTB Support
>
>
>
> You HAVE to recompile it, this is recommended man.
>
>
>
> -----Original Message-----
> From: Fahad [mailto:fahad@netlogicbroadband.com]
> Sent: Thursday, May 22, 2003 5:53 PM
> To: lartc@mailman.ds9a.nl
> Subject: [LARTC] CBQ and HTB Support
>
> Hi all , does Kernel 2.4 supports CBQ and HTB by default or we have to
> recompile it.
>
> Regards
> Fahad Khan
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/