From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Harkisoon Sharan (CCI-Gainesville)" Date: Fri, 23 May 2003 13:14:45 +0000 Subject: RE: [LARTC] u32 filter Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org tc -s filter ls dev eth0 or whatever device you are using you can also check out the qdiscs and classes. The classes actually tell you how much bandwidth has passed, which is pretty handy. tc -s qdisc ls dev... tc -s class ls dev... -----Original Message----- From: Esteban [mailto:listas@dejawu.com.ar] Sent: Friday, May 23, 2003 5:58 AM To: Lartc Subject: [LARTC] u32 filter is there any command to see how my u32 filters have been applyed? in case not, i should use iptables & fwmarks right? thanks and greets _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/