From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Leigh Waldie" <lartc@thisisnota.co.uk>
Date: Wed, 25 Jun 2003 14:04:08 +0000
Subject: Re: [LARTC] Linux router and Bandwidth control
Message-Id: <marc-lartc-105655019823881@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105654378716670@msgid-missing>
In-Reply-To: <marc-lartc-105654378716670@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hey Joe,

One <possible> configuration is to configure your linux box as an ethernet bridge
between your client machines and the public router

|===|
| PC 1 |
|===|\
         \
|===|  \       |====|             |====|
| PC 2 |---O------| LINUX |-------------| ROUTER |
|===|  /       |====|             |====|
         /
|===|/
| PC 3 |
|===|

and then make use of the "WRR" qdisc to control the traffic.

There are obviously many other possibilities, but this is the method I am currently
testing, so I thought I would make you aware of it's existence.

The link for more info is http://wipl-wrr.sourceforge.net/

Leigh


> Hello All,
>
> I have 1.5Mbits Backbone connection with 16 public ip address.
>
> I like to provide share my connection with someother my friends how will
> have public ip addess.
>
> So i wanted to configre linux router with bandwidth controll for my friends
> connection.
>
> Actully i tried with single interface in linux and CBQ but it does not
> controll.
>
> I should do not use NAT as my friends are running web servers.
>
> Is it possible to configure in linux.or some links to configure this
>
> Advance thanks
> Joe
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/