--__--__--

Message: 2
Date: Sat, 28 Jun 2003 15:51:14 +1000 (EST)
From: Brad Lay <brad@coombabah.net>
To: Nikolay Datchev <nik@varna.net>
Cc: olagoke Metibemu <olagokemetibemu@yahoo.com>,
	Ashutosh Pattanaik <ashutosh.pattanaik@einfinitus.com>,
	lartc@mailman.ds9a.nl
Subject: Re: [LARTC] does tc support mpls ?

On Fri, 27 Jun 2003, Nikolay Datchev wrote:

  

I assume that your current ethernet card speed is 100 Mbit/s

Just do

mii-tool eth0 -A 10BaseT
    

Or you could do,
tc qdisc add dev ethX root tbf rate 10Mbit latency 50ms burst 1540

(I'm really not sure about latency and burst, because I usually have the
rate set at 220kbit. YMMV).

  

-- Nikolay Datchev

On Fri, 27 Jun 2003, olagoke Metibemu wrote:

    

HELLO ALL,
I WILL BE VERY HAPPY IS ANY BODY ON THISLIST CAN TELL ME HOW TO SET MY ETHERNET LAN SPEED TO 10MBPS ON A REDHAT BOX.

THANKS

GOKE
NEWBIE
      

Regards,

Brad Lay ( brad /at/ coombabah.net )

 W) http://coombabah.net/

"I used to be indecisive, now I'm not so sure."

--__--__--