From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-7?Q?=D3=F4=E1=EC=DC=F4=E7=F2_=CA=E5=EA=DD=F2?= Date: Mon, 30 Jun 2003 14:42:18 +0000 Subject: [LARTC] tc filter question. Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Well so far I've used tc with htb with success, installed on a machine with two ethernet interfaces acting as a bridge. On eth0 I applied the ougoing policy and on eth1 the incomming. My users ussualy they use lot of protocols ( IRC, KAZAA and many more ) the IRC protocol by itself is from port 6667 up to 7000. So as you understand I have to write 300 and more lines for filtering the IRC traffic to feed it in a class that I've made up for the minimal bandwidth allocation. My problem is on how to make a filter to accept sport 6667-7000. I've searched but I didn't found anything usefull in the list archives. Is there any way to do that or I have to make one filter per port ? Best regards Stamatis _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/