From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Mon, 01 Sep 2003 19:10:01 +0000 Subject: Re: [LARTC] (no subject) Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Monday 01 September 2003 20:05, Gabriel Corcodel wrote: > Well, > I came here with a strange problem. > Let's have the following topology. > Equipment A (IPAddr 192.168.1.x) - Interface 1 Linux Router > (192.168.1.1)-Interface 2 Linux Router (192.168.2.1) - Equipment B (IPAddr > 192.168.2.x) > Quite simple, isn't it? > What I want... > I want a program onto the Linux Router which can modify the values of ping > and packet loss which are obtained between equipments A and B. > I want to ... shuffle the packets, to make, for example, that always > packets 5,6 and 7 from a raw of 8 packets sent from device A to B to reach > device B after the arrival of packet 8, etc. > Whats the point? > I want to inform the customers which are using those > equipments/applications that if the ping is increasing, let's say, over 180 > ms, or, if the packet loss is increased over 30% or the jitter, or... they > will loose > connectivity/they will experience [...] problems. > And, in order for me to have this informations, I have to emulate diferent > aspects of a real network. > So... how can I do this? > Any ideas? Only one : http://snad.ncsl.nist.gov/itg/nistnet/ Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/