From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Date: Thu, 04 Sep 2003 17:05:16 +0000 Subject: [LARTC] port forwarding to different servers with nat Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hey guys, here's a basic problem I cannot seem to figure out. I've got a box doing NAT for some servers and masquarading for a bunch of other desktops. The way I have it working, I need to the give my NAT box one IP number for the masquarding, and then one additional IP number for each server it NATs for. That's a waste; I'd like to give the NAT box one IP for all servers, and then forward to the correct server based on port. (Yes, that implies none of the servers can run services on the same port, and I'm fine with that.) It seems like this should be a pretty common scenario, but I haven't been able to get it working and I haven't seen any examples online. I'm sure *somebody* has it working.... would that person please share the wealth? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/