From mboxrd@z Thu Jan  1 00:00:00 1970
From: Mitsuru MIZUTANI <s5smitty@toyota-ti.ac.jp>
Date: Tue, 09 Sep 2003 02:42:58 +0000
Subject: [LARTC] CBQ.init
Message-Id: <marc-lartc-106307550716418@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-104039526016044@msgid-missing>
In-Reply-To: <marc-lartc-104039526016044@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-2022-jp"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hello everyone,

I am using CBQ.init to shape bandwidth but I have a problem.


	   Linux PC2 (192.168.0.10)
	   
		    |
          +---------------------+
          |eth0 192.168.0.1     | ← Linux router
          |---------------------|
          |eth1 192.168.1.1     |
          +---------------------+
                    |
                    
           Linux PC1 (192.168.1.10)
         
         
I want to limit bandwidth from "Linux PC1" to "Linux PC2"
more than 10Mbps.

So I set CBQ.init following like this.

/etc/rc.d/CBQ.init
DEVICE=eth0,100Mbit,10Mbit
RATEMbit
WEIGHT=1Mbit
PRIO=5

When I set RATE=6Mbit,I can limit bandwidth 6Mbps.
But I set RATE=7Mbit,8Mbit,...
     I can limit bandwidth only 6.95Mbps everytime.
Why?

Could you tell me how to limit bandwidth more than 7Mbps.

Mitsuru MIZUTANI

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/