From: "Alex" <alex@hostingcenter.ro>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Official RH kernel documents, and load balancing
Date: Tue, 23 Sep 2003 00:36:05 +0000 [thread overview]
Message-ID: <marc-lartc-106427749009709@msgid-missing> (raw)
In-Reply-To: <marc-lartc-106426463629736@msgid-missing>
I'm not sure what the document says, but after make bzImage && make modules
&& make modules_install you can do a "make bzlilo" if you are using lilo as
your boot loader and it will copy vmlinuz in /boot or just copy
/usr/src/linux/arch/i386/boot/bzImage to /boot and then configure lilo or
grub, whatever you have.
btw, if you do "make bzlilo" it will work even if you have grub installed
instead of lilo ( it will copy the thing to /boot but you will also see a
error about lilo.conf, but nothing to worry about )
Alex
----- Original Message -----
From: <carlosh@echos.co.nz>
To: <lartc@mailman.ds9a.nl>
Sent: Tuesday, September 23, 2003 12:09 AM
Subject: [LARTC] Official RH kernel documents, and load balancing
> Hi:
>
>
> I have an 'advanced-networking' problem. I want to have two interfaces to
> the internet, apart from the internal one to the LAN.
>
> I came across this page:
>
http://www.redhat.com/mirrors/LDP/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.multipl
> e-links.html
>
>
> and Julian's patches for the kernel published here:
> http://www.ssi.bg/~ja/
> and the How-to: http://www.ssi.bg/~ja/nano.txt
>
>
> So, I downloaded the patch:
>
> routes-2.4.22-9.diff (December 14, 2001), and applied it to my 2.4
kernel...
>
>
> The kernel re-compile part was fine, following the instructions in :
>
> http://tldp.org/HOWTO/Kernel-HOWTO/
>
>
> The issue is when I have to create a new initrd file.. it appears to
create
> a vmlinuz, not a bzImage as the kernel-howto document says.
>
>
> So the new kernel does not boot...
>
>
> Questions:
>
> Have anyone done this?
>
> I mean, having two connections to the Internet, using RH8.0 or RH 9.0, and
> having them selecting (balancing) which interface to use to send packets
> out, and receiving in either seamlessly and with NAT ?
>
> I think this functionality should be built in and available, instead of
> having to patch the kernel?
>
> What would you guys recommend?
>
>
> As for the initrd part, any suggestions? Is there an official RedHat
> "re-build kernel" document?
>
>
>
> Thanks before-hand,
>
> Carlos
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-09-23 0:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-22 21:09 [LARTC] Official RH kernel documents, and load balancing carlosh
2003-09-23 0:36 ` Alex [this message]
2003-09-23 1:00 ` Daniel Chemko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106427749009709@msgid-missing \
--to=alex@hostingcenter.ro \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox