Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: "Kristiadi Himawan" <kristiadi_himawan@dtp.net.id>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Htb on trunked line
Date: Wed, 01 Oct 2003 20:48:01 +0000	[thread overview]
Message-ID: <marc-lartc-106504041919253@msgid-missing> (raw)
In-Reply-To: <marc-lartc-106503280409228@msgid-missing>

Ya, i already use linux+iproute2+tc.The shaping is fine but not with the
filter.

I already read a lot of docs but can't found the same case so if you have
appropriate document links, i will be glad to read that... :)

Yeah...abt cisco i hope they hear that too :))

----- Original Message -----
From: "Steve Wright" <paua@quicksilver.net.nz>
To: "Kristiadi Himawan" <kristiadi_himawan@dtp.net.id>
Cc: "lartc" <lartc@mailman.ds9a.nl>
Sent: Thursday, October 02, 2003 1:55 AM
Subject: Re: [LARTC] Htb on trunked line


> On Thu, 2003-10-02 at 06:41, Kristiadi Himawan wrote:
> > Dear All,
> >
> > I have configuration like this :
> >
> > DVB     Modem
> > |                |                                 ___Link A
> > \               /     trunk                    /
> > CiscoRouter ------------CiscoSwitch-------Link B
> >                                                  \___
> >                                                         Link C
> >
> > Now i want to put a linux bandwith manager using htb to controll Link
> > A-C bandwith,
> > but i don't know where to put the linux pc.
> > I ever try to put the linux pc at the trunked line between CiscoRouter
> > and CiscoSwitch but found that all traffic always go to default class
> > not to appropriate class
> > and i think that's because of VLAN 802.1Q data format at that line so
> > the filter always miss.
> >
> > Any suggestion abt this kind of configuration?
>
>
> remove all the cisco equipment and replace with Linux..  8-)
>
> Linux+iproute2+tc will easily do what you ask, and the cisco will not.
> The answer is that simple.
> I wish there was a nice GUI config for this, but there is not, and it is
> very complicated for me to make.
>
> I see your earlier question about "how to make this in Linux", and I
> would suggest you replace your VLAN config with a new Linux IPRoute2+tc
> config.  There will be a lot of reading for you to do, however.  8-/
> Google for "policy routing" and read about policy routing theory.
>
> I think cisco should be very concerned about the day that Linux
> IPRoute2+tc has a GUI...  Perhaps, after that day cisco will suddenly
> design routers that will run Linux.  8-))
>
>
> best regards,
> Steve
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

  parent reply	other threads:[~2003-10-01 20:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-10-01 18:41 [LARTC] Htb on trunked line Kristiadi Himawan
2003-10-01 18:55 ` Steve Wright
2003-10-01 20:39 ` Kristiadi Himawan
2003-10-01 20:48 ` Kristiadi Himawan [this message]
2003-10-01 23:02 ` Ryan Goldberg
2003-10-01 23:40 ` DTPNet Support
2003-10-03  8:11 ` Kristiadi Himawan
2003-10-06 10:58 ` Ryan Goldberg
2003-10-07  2:54 ` Kristiadi Himawan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-106504041919253@msgid-missing \
    --to=kristiadi_himawan@dtp.net.id \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox