From: Thomas Kirk <thomas@arkena.dk>
To: lartc@vger.kernel.org
Subject: [LARTC] Wondershaper modifications
Date: Thu, 09 Oct 2003 08:42:51 +0000 [thread overview]
Message-ID: <marc-lartc-106568905530749@msgid-missing> (raw)
Hep Dear Listmembers and Stef!
Setup
Internet
eth0
|
|
-----------------
| | | |
eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc
All Lans are natted to eth0
Now i use wondershaper (1.1a) on eth0 to shap interactive traffic
(work allready thanks!) But i have a special requirments for
priorities
samba traffic from eth1 to internet. Ive done this with the following
lines in iptables and wondershaper :
iptables :
$IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j
MARK --set-mark 2
$IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j
MARK --set-mark 2
wondershaper :
tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw
classid 1:10
This setup seems to work partly. When i browser network on anohter
host over internet i get no lag and fast response (low latency).
But when i try to edit file (3kb) it takes around 10 seconds to save
the file? Since my connection is 2048/512 and ive set my UPLINKE0 it
should take no more than 1-2 secs to update a file over internet? What
am i overlooking here?
--
Venlig hilsen/Kind regards
Thomas Kirk
ARKENA
tlf/phone +4570233456
thomas(at)arkena(dot)com
Http://www.arkena.com
"It's naive to think you can change a person--except maybe that
boy who works in the library." -- Lisa Simpson
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2003-10-09 8:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-09 8:42 Thomas Kirk [this message]
2003-10-09 16:51 ` [LARTC] Wondershaper modifications Stef Coene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106568905530749@msgid-missing \
--to=thomas@arkena.dk \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox