From: Padraig Brady <padraig.brady@corvil.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] bridging troubles
Date: Mon, 24 Nov 2003 14:46:19 +0000 [thread overview]
Message-ID: <marc-lartc-106968528330656@msgid-missing> (raw)
In-Reply-To: <marc-lartc-106968023824618@msgid-missing>
Robert Kurjata wrote:
> Witaj Padraig,
>
> W Twoim liœcie datowanym 24 listopada 2003 (14:18:04) mo¿na przeczytaæ:
>
> PB> Hi, I would like to be able to control
> PB> the slave devices of a bridge independently
> PB> of the bridge interface. For e.g. if I have
> PB> eth0 and eth1 in a bridge eth0-eth1, then
> PB> I the following doesn't give an error,
> PB> but doesn't actually work either?
>
> PB> ip link set dev eth0 promisc on
>
> AFAIR in the bridge the interfaces MUST be in promisc mode for the
> bridge to work at all. So the command above has no meaning.
Well it does if I want to stop traffic temporarily.
> PB> However this does work?
>
> PB> ip link set dev eth0 down
this does stop traffic temporarily, but
has other side affects I don't want.
Pádraig.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2003-11-24 14:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 13:18 [LARTC] bridging troubles Padraig Brady
2003-11-24 14:46 ` Padraig Brady [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106968528330656@msgid-missing \
--to=padraig.brady@corvil.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox