Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Johan Cimen <c99jcn@cs.umu.se>
To: lartc@vger.kernel.org
Subject: [LARTC] forwarding in tcng
Date: Tue, 02 Dec 2003 20:02:09 +0000	[thread overview]
Message-ID: <marc-lartc-107039661212864@msgid-missing> (raw)

Hi!

I am learning tcng without having experiance of tc and I am trying to
build something that shall schedule traffic dependent on the value in the
IPv4 packets ip_ttl field.

I have read the tcng reference manual and cannot find information about
forwarding. Is it possible to farward packets from ingress to egress
without sending them upwards in layers?

NIC---->ingress---->forward----->egress---->

In ingress I do some metering and in egress: classifying and Queuing.

Example (basic part of the source):

#includes
#defines

dev eth1 {
	$P = bucket(rate 1Mbps, burst 2kB, mpu 64B);
	ingress {
    		class (<>)
			if ((ip_ttl & 0x81) = 0x81) &&
			(conform $p && count $P);
    		drop if 1;
	}

	egress {
		class (<$high>) if (((ip_ttl & 0x1E) >> 1) <= 0x0F) &&
			(((ip_ttl & 0x1E) >> 1) >= 0x0C);
		class (<$mid>)....
		class (<$low>)....

		prio {
			$high = class {fifo (limit 64kB);}
			$mid = ...
			$low = ...
		}
	}

}

If forwarding is not possible can I use hash table with tcindex to store
information at ingress, and use this information at egress?

Thanks!

/Johan. C

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

             reply	other threads:[~2003-12-02 20:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-12-02 20:02 Johan Cimen [this message]
2003-12-05  6:36 ` [LARTC] forwarding in tcng Martin A. Brown
2003-12-05  8:25 ` Johan Cimen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-107039661212864@msgid-missing \
    --to=c99jcn@cs.umu.se \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox