From: rajkumars@asianetindia.com
To: lartc@vger.kernel.org
Subject: [LARTC] Newbie HTB shaping question
Date: Tue, 09 Dec 2003 11:37:41 +0000 [thread overview]
Message-ID: <marc-lartc-107097396006285@msgid-missing> (raw)
[-- Attachment #1: Type: text/plain, Size: 1860 bytes --]
Hi,
I am following the HTB user manual and testing HTB on my local lan, using the rules given in the manual. I applied the rules in my eth0 and limited it to 100kbps, but when I tried to wget a file from another machine it came at 1mbps, Here are the commands and the settings. Did I do any thing stupid or is this supposed to work that way?
1. The commands
tc qdisc add dev eth0 root handle 1: htb default 12
tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbps ceil 100kbps
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst 192.168.3.90 match ip dport 8080 0xffff flowid 1:10
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.3.92 flowid 1:11
tc qdisc add dev eth0 parent 1:10 handle 20: pfifo limit 5
tc qdisc add dev eth0 parent 1:11 handle 30: pfifo limit 5
tc qdisc add dev eth0 parent 1:12 handle 40: sfq perturb 10
2. wget output
raj@indus:~$ wget -O /dev/null http://penguin:8080/knoppix
--14:01:45-- http://penguin:8080/knoppix
=> `/dev/null'
Resolving penguin... done.
Connecting to penguin[192.168.3.90]:8080... connected.
HTTP request sent, awaiting response... 200 OK
Length: 733,825,024 [text/plain]
2% [> ] 16,952,192 1.03M/s ETA 11:02
As you can see from the command and wget output i limited the outgoing bandwidth to 100kbps but i am still getting 1Mbps. Is this what I am supposed to get or did I do some thing really stupid?
I have attached the full logs as a text file also incase my mail client messes up the output.
Thanks in Advance,
raj
[-- Attachment #2: htb.log --]
[-- Type: application/octet-stream, Size: 3104 bytes --]
root@indus:~# cat htb.sh
#!/bin/sh
tc qdisc add dev eth0 root handle 1: htb default 12
tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbps ceil 100kbps
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst 192.168.3.90 match ip dport 8080 0xffff flowid 1:10
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.3.92 flowid 1:11
tc qdisc add dev eth0 parent 1:10 handle 20: pfifo limit 5
tc qdisc add dev eth0 parent 1:11 handle 30: pfifo limit 5
tc qdisc add dev eth0 parent 1:12 handle 40: sfq perturb 10
root@indus:~# tc -s -d qdisc show dev eth0
qdisc sfq 40: quantum 1514b limit 128p flows 128/1024 perturb 10sec
Sent 84 bytes 2 pkts (dropped 0, overlimits 0)
qdisc pfifo 30: limit 5p
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc pfifo 20: limit 5p
Sent 2672006 bytes 40491 pkts (dropped 0, overlimits 0)
qdisc htb 1: r2q 10 default 12 direct_packets_stat 0 ver 3.13
Sent 2672090 bytes 40493 pkts (dropped 0, overlimits 0)
root@indus:~# tc -s -d class show dev eth0
class htb 1:11 parent 1:1 leaf 30: prio 0 quantum 1024 rate 80Kbit ceil 800Kbit burst 1701b/8 mpu 0b cburst 2623b/8 mpu 0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 136159 ctokens: 20992
class htb 1:1 root rate 800Kbit ceil 800Kbit burst 2623b/8 mpu 0b cburst 2623b/8 mpu 0b level 7
Sent 2672222 bytes 40495 pkts (dropped 0, overlimits 0)
rate 224bps 3pps
lended: 0 borrowed: 0 giants: 0
tokens: 18694 ctokens: 18694
class htb 1:10 parent 1:1 leaf 20: prio 0 quantum 3072 rate 240Kbit ceil 800Kbit burst 1906b/8 mpu 0b cburst 2623b/8 mpu 0b level 0
Sent 2672006 bytes 40491 pkts (dropped 0, overlimits 0)
rate 224bps 3pps
lended: 40493 borrowed: 0 giants: 0
tokens: 33830 ctokens: 18694
class htb 1:12 parent 1:1 leaf 40: prio 0 quantum 6144 rate 480Kbit ceil 800Kbit burst 2213b/8 mpu 0b cburst 2623b/8 mpu 0b level 0
Sent 84 bytes 2 pkts (dropped 0, overlimits 0)
lended: 2 borrowed: 0 giants: 0
tokens: 28986 ctokens: 20673
root@indus:~# tc -s -d filter show dev eth0
filter parent 1: protocol ip pref 1 u32
filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10
match c0a8035a/ffffffff at 16
match 00001f90/0000ffff at 20
filter parent 1: protocol ip pref 1 u32 fh 800::801 order 2049 key ht 800 bkt 0 flowid 1:11
match c0a8035c/ffffffff at 12
raj@indus:~$ wget -O /dev/null http://penguin:8080/knoppix
--14:01:45-- http://penguin:8080/knoppix
=> `/dev/null'
Resolving penguin... done.
Connecting to penguin[192.168.3.90]:8080... connected.
HTTP request sent, awaiting response... 200 OK
Length: 733,825,024 [text/plain]
2% [> ] 16,952,192 1.03M/s ETA 11:02
next reply other threads:[~2003-12-09 11:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-09 11:37 rajkumars [this message]
2003-12-09 12:51 ` [LARTC] Newbie HTB shaping question Jan Gerritsen
2003-12-09 15:43 ` Rajkumar S
2003-12-09 16:15 ` Artūras Šlajus
2003-12-09 16:34 ` Rajkumar S
2003-12-09 16:35 ` Martin A. Brown
2003-12-09 17:19 ` Rajkumar S
2003-12-09 19:59 ` Darryl Miles
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-107097396006285@msgid-missing \
--to=rajkumars@asianetindia.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox