Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Tony Yat-Tung Cheung <dragonman@asiayeah.com>
To: lartc@vger.kernel.org
Subject: [LARTC] Simulation with Packet Lost and Packet Delays
Date: Sun, 21 Dec 2003 15:31:09 +0000	[thread overview]
Message-ID: <marc-lartc-107202103804758@msgid-missing> (raw)

[-- Attachment #1: Type: text/plain, Size: 446 bytes --]

Hi All,

I would like to be able to simulate network congestion and delay on 
tcp/udp connections between two hosts. I would need to simulate packet 
lost and packet delay.

I think I would need to use a Linux box with two network cards to act as 
a pass-through ethernet bridge. Is it the case? Does this how-to guide 
provides good information in this area?

Thank you very much! Any advice will be much appreciated.

Best Regards,
Tony Cheung

[-- Attachment #2: Type: text/html, Size: 804 bytes --]

             reply	other threads:[~2003-12-21 15:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-12-21 15:31 Tony Yat-Tung Cheung [this message]
2003-12-22 16:03 ` [LARTC] Simulation with Packet Lost and Packet Delays Stef Coene
2003-12-24  9:02 ` [LARTC] Simulation with Packet Lost and Packet Delays (How to Tony Yat-Tung Cheung
2003-12-24 21:13 ` [LARTC] Simulation with Packet Lost and Packet Delays (How toset andybr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-107202103804758@msgid-missing \
    --to=dragonman@asiayeah.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox