From: Junus Junarto junus@mail.com
To: lartc@vger.kernel.org
Subject: [LARTC] routing
Date: Fri, 05 Jan 2001 12:33:25 +0000 [thread overview]
Message-ID: <marc-lartc-98373940416823@msgid-missing> (raw)
In-Reply-To: <marc-lartc-98373940416816@msgid-missing>
<PRE>You could do it with kernel 2.2 without port assignment too:
You can keep to use your ordinary maquerade and add two line of commands
below :
Make IP NAT:
- ip rule add from 192.168.0.5/32 nat 194.219.85.4
(to make NAT a subnetwork form 192.168.0.4 - 192.168.0.7 just change prefik
to 30:
- ip rule add from 192.168.0.4/30 nat 194.219.85.4)
Add IP aliasing 194.219.85.4 to interface with real address: (e.g: eth0)
- ifconfig eth0:0 194.219.85.4 netmask 255.255.255.0
( or use IP command:
- ip addr add 194.219.85.4/24 dev eth0 )
Note: you must active advance networking option at linux kernel
configuration before use ip command.
Regards,
Junus Junarto D
><i> --__--__--
</I>><i>
</I>><i> Date: Wed, 03 Jan 2001 07:37:31 -0500
</I>><i> From: "David A. Bandel" <<A HREF="mailto:david@pananix.com">david@pananix.com</A>>
</I>><i> Organization: Pananix, S.A.
</I>><i> To: Spyros Dimas <<A HREF="mailto:spyros@liaison.gr">spyros@liaison.gr</A>>
</I>><i> Cc: <A HREF="mailto:lartc@mailman.ds9a.nl">lartc@mailman.ds9a.nl</A>
</I>><i> Subject: Re: [LARTC] routing
</I>><i>
</I>><i> Spyros Dimas wrote:
</I>><i> >
</I>><i> > Hello and Happy New Year!
</I>><i> > We have a LAN with 2 interfaces. One is configured with addresses
</I>><i> > 192.168.0.x (pseudo-addresses) and other one with real addresses, so we
</I>><i> > use ip-masquerade. But we would like one of workstation witch has a
</I>><i> > address 192.168.0.5 to have a real address, such us 194.219.85.4, on the
</I>><i> >
</I>><i> > first interface or on the second. Could you tell us how we can do it. Or
</I>><i> > if you have
</I>><i> > another idea. Thanks.
</I>><i>
</I>><i> This is really an issue for your firewall/masquerade software. If you
</I>><i> are masquerading using Linux and either ipchains (2.2.x) or iptables
</I>><i> (2.4.x) it's easy.
</I>><i>
</I>><i> In either case, your firewall/masquerade server needs to have
</I>><i> 194.219.85.4 aliased on the external interface, then:
</I>><i>
</I>><i> 2.2.x:
</I>><i> get ipmasqadm and set up a portforward from the masq server to the
</I>><i> workstation. Assuming you want to forward only port 80, the following
</I>><i> will work:
</I>><i> ipmasqadm portfw -a -P tcp -L 194.219.85.4 80 -R 192.168.0.5 80
</I>><i>
</I>><i> better:
</I>><i> 2.4.x:
</I>><i> use iptables and runthe following:
</I>><i> iptables -t nat -A PREROUTING -d 194.219.85.4 -p tcp --dport 80 -j DNAT
</I>><i> --to-destination 192.168.0.5:80
</I>><i>
</I>><i> With iptables you can easily omit the port stuff so everything passes
</I>><i> (just like the workstation is on the Internet) or qualify your matches
</I>><i> with -m multiport and select several individual ports or a range (or
</I>><i> ranges) of ports.
</I>><i>
</I>><i> Ciao,
</I>><i>
</I>><i> David A. Bandel
</I>><i> --
</I>><i> Focus on the dream, not the competition.
</I>><i> -- Nemesis Racing Team motto
</I>><i> *** sent via a Linux 2.4.0-test12 system ***
</I>><i>
</I>><i>
</I>><i>
</I>><i> --__--__--
</I>><i>
</I>><i> _______________________________________________
</I>><i> LARTC mailing list
</I>><i> <A HREF="mailto:LARTC@mailman.ds9a.nl">LARTC@mailman.ds9a.nl</A>
</I>><i> <A HREF="http://mailman.ds9a.nl/mailman/listinfo/lartc">http://mailman.ds9a.nl/mailman/listinfo/lartc</A>
</I>
______________________________________________
FREE Personalized Email at Mail.com
Sign up at <A HREF="http://www.mail.com/?sr=signup">http://www.mail.com/?sr=signup</A>
</PRE>
next prev parent reply other threads:[~2001-01-05 12:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-03 11:13 [LARTC] routing Spyros
2001-01-03 12:37 ` David
2001-01-05 12:25 ` Junus
2001-01-05 12:33 ` Junus [this message]
2001-07-06 14:03 ` [LARTC] Routing Dave Miller
2001-07-06 15:01 ` Arthur van Leeuwen
2001-07-06 15:18 ` Dave Miller
2001-07-07 6:33 ` Deepak singhal
2001-07-07 18:24 ` Arthur van Leeuwen
2001-07-07 18:33 ` Dave Miller
2001-07-07 18:37 ` Arthur van Leeuwen
2001-12-25 4:58 ` [LARTC] routing Daniel Wittenberg
2001-12-25 12:16 ` bert hubert
2002-10-30 12:57 ` [LARTC] Routing Jose Sebastiao Martins
2002-10-30 15:57 ` Martin A. Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-98373940416823@msgid-missing \
--to=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox