From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guy Van Den Bergh Date: Thu, 22 Mar 2001 22:20:00 +0000 Subject: Re: [LARTC] pointopoint flag Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org the pointtopoint flag is something typical for the medium used. E.g. ethernet is by nature a broadcast medium and thus not pointtopoint. PPP, as its name says,is a point to point protocol. So this is (or should be) not configurable, unless you are trying some weird setups. Guy mike stjohn wrote: > how do you set the pointopoint flag using ip command? > > is it an automatic setting when ip is configuring a ppp link | or am I > missing something in the ip-cref. > > > thanks > > msj > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/