From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ravikanth Samprathi Date: Thu, 19 Apr 2001 23:20:43 +0000 Subject: Re: [LARTC] urgent help needed in iproute2+tc Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, One more requirement is the following:- All the packets from the voip source (with a particular ip address, with a particular source, arriving on a particular interface) must have the TOS byte changed to the value 0x06, can u let me know how to do this please? Thenx in Advance. ravi At 01:18 AM 4/16/2001 +0700, Junus Junarto D wrote: >Hi Ravi, > >First you must know what port is used on voip. >To check the correct port of voip, you can use Etherreal, tcpdump or >Sniffer. >I guess it is the same as H.323 on MS NetMeeting used with UDP port 1720. >Port 1720 = 0x06B8. > >In here we use priority and simple FIFO queuing. Both queuing are used in >ordinary Cisco Routers. >Below is the commands: > >------------------------------ >###### To control eth0 ###### >#Create Priority queuing (minimum 3 bands) >tc qdisc add dev eth0 root handle 1: prio bands 3 priomap 0 1 2 > >#Create FIFO queuing and attach to priority queuing >tc qdisc add dev eth0 parent 1:1 handle 2: pfifo limit 1024 >tc qdisc add dev eth0 parent 1:2 handle 3: pfifo limit 1024 >tc qdisc add dev eth0 parent 1:3 handle 4: pfifo limit 1024 > >#Installing a u32 classifier for the traffic >#In Cisco router 'tc filter' command has same function as access-list >tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 divisor 1 > ># Filter UDP traffic which has destination port 1720 (0x06B8) and direct ># this traffic to class 1:1 (FIFO priority 1) >tc filter add dev eth0 parent 1:0 prio 1 u32 match udp src 0x06B8 0xffff \ >flowid 1:1 ># Filter UDP traffic which has source port 1720 (0x06B8) and direct this ># traffic to class 1:1 (FIFO priority 1) >tc filter add dev eth0 parent 1:0 prio 1 u32 match udp dst 0x06B8 0xffff \ >flowid 1:1 > >###### To control eth1 ###### >#Create Priority queuing (minimum 3 bands) >tc qdisc add dev eth1 root handle 1: prio bands 3 priomap 0 1 2 > >#Create FIFO queuing and attach to priority queuing >tc qdisc add dev eth1 parent 1:1 handle 2: pfifo limit 1024 >tc qdisc add dev eth1 parent 1:2 handle 3: pfifo limit 1024 >tc qdisc add dev eth1 parent 1:3 handle 4: pfifo limit 1024 > >#Installing a u32 classifier for the traffic >#In Cisco router 'tc filter' command has same function as access-list >tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 divisor 1 > ># Filter UDP traffic which has destination port 1720 (0x06B8) and direct ># this traffic to class 1:1 (FIFO priority 1) >tc filter add dev eth1 parent 1:0 prio 1 u32 match udp src 0x06B8 0xffff \ >flowid 1:1 ># Filter UDP traffic which has source port 1720 (0x06B8) and direct this ># traffic to class 1:1 (FIFO priority 1) >tc filter add dev eth1 parent 1:0 prio 1 u32 match udp dst 0x06B8 0xffff \ >flowid 1:1 > >###### To control eth2 ###### >#Create Priority queuing (minimum 3 bands) >tc qdisc add dev eth2 root handle 1: prio bands 3 priomap 0 1 2 > >#Create FIFO queuing and attach to priority queuing >tc qdisc add dev eth2 parent 1:1 handle 2: pfifo limit 1024 >tc qdisc add dev eth2 parent 1:2 handle 3: pfifo limit 1024 >tc qdisc add dev eth2 parent 1:3 handle 4: pfifo limit 1024 > >#Installing a u32 classifier for the traffic >#In Cisco router 'tc filter' command has same function as access-list >tc filter add dev eth2 parent 1:0 protocol ip prio 1 u32 divisor 1 > ># Filter UDP traffic which has destination port 1720 (0x06B8) and direct ># this traffic to class 1:1 (FIFO priority 1) >tc filter add dev eth2 parent 1:0 prio 1 u32 match udp src 0x06B8 0xffff \ >flowid 1:1 ># Filter UDP traffic which has source port 1720 (0x06B8) and direct this ># traffic to class 1:1 (FIFO priority 1) >tc filter add dev eth2 parent 1:0 prio 1 u32 match udp dst 0x06B8 0xffff \ >flowid 1:1 >------------------------------ > > >I haven't tried it before. Let me know it can work or not. > >Regards, > > > Date: Tue, 10 Apr 2001 16:23:43 -0700 > > To: lartc@mailman.ds9a.nl > > From: Ravikanth Samprathi > > Subject: [LARTC] urgent help needed in iproute2+tc > > > > Hi all, > > I am running linux-2.4.0 with > > 3 interfaces - eth0, eth1, and eth2. > > > > eth0 is the outgoing WAN interface. > > eth1 and eth2 are the internal LAN interfaces. > > eth1 and eth2 belong to a bridge group br0. > > eth1 is connected to a voice-over-ip phone. > > eth2 is connected to a pc. > > > > so, the setup is > ------------------------------ > | | > voip-phone --->| eth1 ---> | > | br0 eth0 -|---WAN > lan-pc ---------->| eth2 ----> | > ------------------------------ > > > > voip-phone can talk with lan-pc > > through-the-bridge-group. > > voip phone can also talk with any other > > phone in the outside-world-through-the-WAN. > > > > I need to setup QoS so that all packets > > from voip-phone (that is destined to either > > eth1, eth2 or to eth0) are provided with > > high-priority-low-delay service. voip-phone > > can be on any lan-interface (eth1 or eth2). > > The only thing that can be surely said > > about the voip-phone is that it will > > have only a particular set of ip addresses > > ranging from 171.72.233.100 to 171.72.233.200. > > > > To implement this, i downloaded the > > iproute2+tc tool version > > iproute2-2.2.4-now-ss991023.tar.gz > > and went through the README files. > > > > Can somebody please help me in > > writing the commands? That will > > be of great help. > > > > Thanking you in advance, > > ravi > > > > > > ---------------------------------------------------> > > Ravi Samprathi work:(408)853-8038 > > Cisco Systems res :(408)988-2268 > > Empowering the Internet Generation > > <--------------------------------------------------- > > > > > > > > > > > > > > >_______________________________________________ >LARTC mailing list / LARTC@mailman.ds9a.nl >http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: >http://ds9a.nl/2.4Routing/ ---------------------------------------------------> Ravi Samprathi work:(408)853-8038 Cisco Systems res :(408)988-2268 Empowering the Internet Generation <--------------------------------------------------- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/