From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ethy H. Brito" Date: Thu, 31 May 2001 12:36:34 +0000 Subject: [LARTC] Multiple interfaces thru one qdisc Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Gurus I am facing a problem controling bandwidth of a bunch of ppp leased lines. I need to direct some ppp interfaces thru one queue for input and other for output traffic. I could not figure how to do it since queues are "bonded" to one "dev" interface at "tc" command. Is it possible to do? What could be the command syntax? I used to do it with source routing and Alan Cox shaper's in kernel 2.0. Now I am confused with lots of parameters and few documentation. FYI I read Linux Adv Routing2.4 version 0.3.0. Environment: Slackware-Current Linux w/kernel 2.4.4 Thanx a lot Ethy H. Brito /"\ InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML +(12) 341-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL Sao Jose dos Campos / \ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/