From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chuanbo Xu Date: Mon, 18 Jun 2001 08:33:53 +0000 Subject: Re: Re: [LARTC] How to measure bandwidth? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hi Stef Coene=A3=AC I execute time_ms.exe and get 2 numbers.=20 Put it and monitor.pl in the same directory. Execute monitor.pl, and get the same error. regards, Chuanbo Xu iproute2@btamail.net.cn You writes=A3=BA >Chuanbo Xu wrote: >>=20 >> Hi Stef Coene=A3=AC >>=20 >> error: >> 'Illegal division by zero at ./monitor.pl line 115' >You need to download time_ms.exe from the same site, make it executable, >try to execute it (it should give you 2 numbers : time in seconds and >time in miliseconds), put it somewhere in your path and try again. > > >Stef > >>=20 >> regards, >>=20 >> Chuanbo Xu >> iproute2@btamail.net.cn >>=20 >> You writes=A3=BA >> >Chuanbo Xu wrote: >> >> >> >> Hi=A3=AC >> >> >> >> I run tc to limit bandwidth. Howerver, how to measure bandwidth? >> >> >> >> regards, >> >> >> >> Chuanbo Xu >> >> iproute2@btamail.net.cn >> >> >> >> _______________________________________________ >> >> LARTC mailing list / LARTC@mailman.ds9a.nl >> >> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2= .4Routing/ >> >Again, take a look at my website. I use firewall rules th count the >> >bytes and to calculate the bandwidth. I make a script to do this : >> >monitor.pl >> > >> > >> >-- >> > >> >Stef >> > >> >More QOS info : http://users.belgacom.net/staf/ >>=20 >> _______________________________________________ >> LARTC mailing list / LARTC@mailman.ds9a.nl >> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4R= outing/ > >--=20 > >Stef > >More QOS info : http://users.belgacom.net/staf/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Rout= ing/