Re: Ram , Flash requirements?

["Gregg C Levine" <obiwanthejediknight@worldnet.att.net>]

Hello from Gregg C Levine normally with Jedi Knight Computers
I do not know. I simply asked whose design this unit was. It happens that I
asked that question early on, and Alan Cox sent me one that says that ELKS
would need work to run on the 80186 family. I suggest you search the
archives of this list to find his answer. I am interested in doing this as
well.
Gregg C Levine obiwanthejediknight@att.net
<This signature will be replaced, pending an approval from the Jedi Council.
>
----- Original Message -----
From: "Vidhiyadharan" <vdharan2001@yahoo.co.uk>
To: "Gregg C Levine" <obiwanthejediknight@worldnet.att.net>
Sent: Tuesday, June 11, 2002 8:50 AM
Subject: Re: Ram , Flash requirements?


> Hello Mr Gregg C Levine
>
> OK we are ready to work on the kernel.
>
> No the board is not from intel. We  have made the board. We have
> developed such that it can be used as a multi purpose board.
> It has got 2 serial ports, ethernet interface, & a Realtime clock.
>
> We have not yet ported any RTOS into it.We want to put linux so that
> we need not develop TCP/IP, PPP stack from scrach.
>
> How should i begin with.?
>
> Please give me your suggessions.
>
> Regards
> vdharan
>
>
> --- Gregg C Levine <obiwanthejediknight@worldnet.att.net> wrote: >
> Hello from Gregg C Levine
> > Not that I know off. It happens that even though ELKS has been
> > targeted at
> > that processor, it would need work on the kernel to enable the
> > onchip
> > peripherals. But I am curious as to who makes your board. Is it on
> > of the
> > demonstration boards made by Intel? Or one you've made yourself?
> > And in that
> > case, how did you make it?
> > Gregg C Levine obiwanthejediknight@att.net
> > <This signature will be replaced, pending an approval from the Jedi
> > Council.
> > >
> > ----- Original Message -----
> > From: "Vidhiyadharan" <vdharan2001@yahoo.co.uk>
> > To: <linux-8086@vger.kernel.org>
> > Sent: Tuesday, June 11, 2002 1:43 AM
> > Subject: Ram , Flash requirements?
> >
> >
> > > Hello everybody,
> > >
> > > Iam new to this group.
> > >
> > > I have a 80186 board with 256 kb ram & 512 kb flash.
> > > Is it possible to port ELKS with TCP/IP & PPP stack to this board
> > ?.
> > > Please give me your suggessions.
> > >
> > > Thanks in advance
> > >
> > > vdharan
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Everything you'll ever need on one web page
> > > from News and Sport to Email and Music Charts
> > > http://uk.my.yahoo.com
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe
> > linux-8086" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at
> > http://vger.kernel.org/majordomo-info.html
> > >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-8086" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> __________________________________________________
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
> http://uk.my.yahoo.com
>