Re: webserver stalls [was Re: bug in (linux) slattach]

[Harry Kalogirou <harkal@rainbow.cs.unipi.gr>]

> On 19 Oct 2002, Harry Kalogirou wrote:
> 
> > 
> > Since I had used ELKS for long time on my network and I hardly had
> > checksum errors, had other biger problems 8), I think that this has
> 
> >From what I've seen in the mailinglist archives, I think other people have
> had similar problems. They probably just gave up when no one answered
> their vague, sometimes irrelevant, questions.
> 
> > something to do with the serial line altering bytes that ELKS transmits.
> > Can you send me the output of "stty -a -F /dev/ttySX" after you setup
> > the connection. Maybe the line is not corectly setup on linux side (XOFF
> > XON and stuff). 
> 
> After issuing "/bin/stty -F /dev/ttyS0 4800" on the Red Hat 7.0 Linux box,
> "stty -a -F /dev/ttyS0" displays:
> speed 4800 baud; rows 0; columns 0; line = 0;
> intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
> eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
> lnext = ^V; flush = ^O; min = 1; time = 0;
> -parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts
> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
> -ixoff
> -iuclc -ixany -imaxbel
> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
> vt0 ff0
> isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop 
> -echoprt
> echoctl echoke
>

As I suspected, misconfigued line. Configure your like this :

intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof =
<undef>;
eol = <undef>; eol2 = <undef>; start = <undef>; stop = <undef>; susp =
<undef>;
rprnt = <undef>; werase = <undef>; lnext = <undef>; flush = <undef>;
min = 1; time = 0;
-parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon
-ixoff
-iuclc -ixany -imaxbel
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0
bs0 vt0
ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt -echoctl -echoke
 

Basicaly the above configuration is done by the -L parameter of
slattach, except the -crtscts. What I do just to be sure is :

# slattach -p [c]slip -L -e /dev/ttyS0
# stty -F /dev/ttyS0 -crtscts
# slattach -p [c]slip -s 4800 -m /dev/ttyS0 &


Harry