From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Olson Subject: boot problem Date: Wed, 10 Apr 2002 15:33:58 -0700 (PDT) Sender: linux-8086-owner@vger.kernel.org Message-ID: <20020410152657.B83358-100000@agora.rdrop.com> References: Mime-Version: 1.0 Return-path: In-Reply-To: List-Id: Content-Type: TEXT/PLAIN; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-8086@vger.kernel.org This is still sketchy, but I thought I'd throw it out there anyway. I finally got my SCSI card up and running last night and installed in my IBM XT. I was able to boot MS DOS, run fdisk and format on the drive. I then booted using my ELKS disk that I had made a while back, and notice that it does detect the hard drive, but unfortunatly somewhere along the line it dies and doesn't complete booting. I know I need to test some more things before I know exactly what's going on here, but I know I was able to boot off of this disk before using a floppy only system, has anyone else run into trouble booting a machine with a hard drive or SCSI controller?? I should have more time tonight to trouble shoot, just thought I'd see if anyone had seen anything like this! Dan