Re: Elks & SIBO

[pauln@truemesh.com]

On Fri, May 24, 2002 at 06:28:46PM +0200, Stefke wrote:
> 
> It compiles fine now (thanx). Got it installed on my 3c. And when I run it
> it boots just fine (to fast to read ;-p ). I get a "login:" prompt, and then
> it keeps print : PID of init = 1.

Great, I'll get the stuff fixed in CVS.  I'm glad it booted, that is
good to hear.
> 
> I'm using a 512K Flash disk in B: . This has an old image I downloade from
> Simon Woods is site a while ago.

OK - I couldn't ever get it to work on large disks, I use a 128k flash
disk for mine. However it may work with 512 (I have 1 and 2 meg images)

I suggest you try to grab the 

http://rainbow.cs.unipi.gr/~harkal/ELKS/images/images-0.1.0.zip

And try the sibo image which is more up to date.  The kernel was a bit
bloaty for my psion and I want to reduce the size but I could usually
run a few commands.

If that fails let me know and I'll try on mine with both Simon's image
and the elkscmd image from Harry.

Good luck

Paul