RE: ELKS porting to DSP

[srinivas srungaram <sskumar341@krify.com>]

Hello Gregg C Levine and   ALL !
 
I and my colleage only  discussed this topic , 3 months earlier.
Now I am on  this  project...
So can u tell me  which parts of the code need to be changed.I want to have minimal code to be booted first and later want to add one by one.
 
I want to make  minimum kernel  Image and bootit from the DSP . This is my first aim.
Thinking in this way Plz ,  suggest me the directories  wise  changes( like   kernel /     , fs ,   /  arch/i86/kernel/      , arch/i86/mm/  ).  
 
I am facing problems  to understand all the code as i am new to this field.
Please Help  me,
 
Thanks and Regards
Srinivas 
 
-----Original Message----- 
From: Gregg C Levine [mailto:obiwanthejediknight@worldnet.att.net] 
Sent: Fri 9/26/2003 9:16 PM 
To: Srinivasa Kumar Srungaram; Linux-8086@Vger.Kernel.Org 
Cc: 
Subject: Re: ELKS porting to DSP


Hello from Gregg C Levine
Everything. ELKS is a x86 targeted project. As it happens, ELKS can not be
ported to that DSP with out major work. You are strongly suggested to
contact the company that makes the chip regarding a more suitable Real Time
kernel. Also please examine the archives of this group, as we went over this
subject, three times much earlier.
Gregg C Levine obiwanthejediknight@att.net
<This signature will be replaced, pending an approval from the Jedi Council.
>
----- Original Message -----
From: "srinivas srungaram" <sskumar341@krify.com>
To: <Linux-8086@Vger.Kernel.Org>
Sent: Wednesday, September 24, 2003 11:20 PM
Subject: ELKS porting to DSP


> Hellow all !
>
> I am trying  to port elks on to Blackfin DSP (21535).
> I took the working sources form  the elks site which  worked   on  my 86
machine.
>
> Can any one suggest me  what are the exact  issuues  (problems) that
comes into picture while porting.
> i.e I want to know which parts of the  code need to changed......
>
> My present status of this project :
>          I  compiled the C sources  of elks with Blackfin compiler
commenting out assembly part and trying to
>             port..
>
> Srinivas
>
>
> _____________________________________________________________
> I use Krify Mail - http://mail.krify.com  Get  Yourname at  Krify today!
> -
> To unsubscribe from this list: send the line "unsubscribe linux-8086" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html




_____________________________________________________________
I use Krify Mail - http://mail.krify.com  Get  Yourname at  Krify today!