From: Tommy McCabe <rocketjet314@yahoo.com>
To: linux-8086@vger.kernel.org
Subject: Whoops!!
Date: Sun, 29 Feb 2004 08:53:39 -0800 (PST) [thread overview]
Message-ID: <20040229165339.62270.qmail@web11703.mail.yahoo.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 198 bytes --]
I forgot to attach the files before pressing the
'Send' button! Sorry.
__________________________________
Do you Yahoo!?
Get better spam protection with Yahoo! Mail.
http://antispam.yahoo.com/tools
[-- Attachment #2: patch2.diff --]
[-- Type: application/octet-stream, Size: 3744 bytes --]
Index: elkscmd/Makefile
===================================================================
RCS file: /cvsroot/elks/elkscmd/Makefile,v
retrieving revision 1.19
diff -u -r1.19 Makefile
--- elkscmd/Makefile 29 May 2002 18:23:03 -0000 1.19
+++ elkscmd/Makefile 29 Feb 2004 16:24:21 -0000
@@ -126,6 +126,15 @@
###############################################################################
#
+# Insert include files into proper directory
+
+$(INSERT_INCLUDE):
+ cp -r ../elks/include/arch /usr/bcc/include
+ cp -r ../elks/include/limuxmt /usr/bcc/include
+
+
+###############################################################################
+#
# Old commands, left as is for now.
$(COMB_TARGET_FS):
@@ -174,7 +183,7 @@
(cd $(TARGET_MNT)/dev ; ./MAKEDEV)
mount_rootfs: $(ROOT_TARGET_FS) $(ELKSCMD_DIR)/rootfs_template/etc/issue
- $(MKFS) $(MKFS_OPTS) $(ROOT_TARGET_FS) $(ROOT_TARGET_BLKS)
+ $(MKFS) $(MKFS_OPTS) -i224 $(ROOT_TARGET_FS) $(ROOT_TARGET_BLKS)
mount $(ROOT_TARGET_FS) $(TARGET_MNT) $(LOOP)
(cd $(ELKSCMD_DIR)/rootfs_template ; tar cf - --exclude CVS *) | \
(cd $(TARGET_MNT) ; tar xpvf -)
@@ -209,32 +218,32 @@
cp $(ELKS_DIR)/arch/i86/boot/Image boot
-comb: mount_combfs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER)
+comb: mount_combfs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER) $(INSERT_INCLUDE)
@for i in $(DIRS); do make -C $$i min_rfs ; done
cp $(ELKS_DIR)/arch/i86/boot/Image $(TARGET_MNT)/boot/linux
cp $(KHELPER) $(TARGET_MNT)/boot/boot
umount $(COMB_TARGET_FS)
dd if=$(FD_BSECT) of=$(COMB_TARGET_FS) bs=512 count=2 conv=notrunc
-full3: mount_full3fs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER)
+full3: mount_full3fs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER) $(INSERT_INCLUDE)
@for i in $(DIRS); do make -C $$i rfs ; done
cp $(ELKS_DIR)/arch/i86/boot/Image $(TARGET_MNT)/boot/linux
cp $(KHELPER) $(TARGET_MNT)/boot/boot
umount $(FULL3_TARGET_FS)
dd if=$(FD_BSECT) of=$(FULL3_TARGET_FS) bs=512 count=2 conv=notrunc
-full5: mount_full3fs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER)
+full5: mount_full3fs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER) $(INSERT_INCLUDE)
@for i in $(DIRS); do make -C $$i rfs ; done
cp $(ELKS_DIR)/arch/i86/boot/Image $(TARGET_MNT)/boot/linux
cp $(KHELPER) $(TARGET_MNT)/boot/boot
umount $(FULL3_TARGET_FS)
dd if=$(FD_BSECT) of=$(FULL3_TARGET_FS) bs=512 count=2 conv=notrunc
-root: mount_rootfs
+root: mount_rootfs $(INSERT_INCLUDE)
@for i in $(DIRS); do make -C $$i min_rfs ; done
umount $(ROOT_TARGET_FS)
-comb_net: mount_rootnetfs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER)
+comb_net: mount_rootnetfs $(ELKS_DIR)/arch/i86/boot/Image $(FD_BSECT) $(KHELPER) $(INSERT_INCLUDE)
cd $(ELKSNET_DIR)/ktcp ; \
make ; \
cp -p -f ktcp $(TARGET_MNT)/bin
@@ -244,7 +253,7 @@
umount $(ROOT_NET_TARGET_FS)
dd if=$(FD_BSECT) of=$(ROOT_NET_TARGET_FS) bs=512 count=2 conv=notrunc
-sibo: mount_sibofs
+sibo: mount_sibofs $(INSERT_INCLUDE)
@for i in $(DIRS); do make -C $$i smin_rfs ; done
umount $(SIBO_TARGET_FS)
Index: elkscmd/file_utils/Makefile
===================================================================
RCS file: /cvsroot/elks/elkscmd/file_utils/Makefile,v
retrieving revision 1.11
diff -u -r1.11 Makefile
--- elkscmd/file_utils/Makefile 29 May 2002 18:23:11 -0000 1.11
+++ elkscmd/file_utils/Makefile 29 Feb 2004 16:24:22 -0000
@@ -39,7 +39,7 @@
PRGS=cat chgrp chmod chown cmp cp dd grep ln ls mkdir mkfifo mknod \
more mv rm rmdir sync touch
-MIN_PRGS=cat chgrp chmod chown cmp cp l ls mknod mkdir mv rm rmdir \
+MIN_PRGS=cat chgrp chmod chown cmp cp ln ls mknod mkdir mv rm rmdir \
sync touch
SMIN_PRGS=cat cp ls mkdir sync
[-- Attachment #3: MAKEDEV --]
[-- Type: application/octet-stream, Size: 8628 bytes --]
#!/bin/sh
# Devices are generated by this script in the same order that they are listed
# in the Documentation/devices.txt file in the Linux 2.4.18 and5.21 kernel
# sources. This includes devices that are not currently relevant to ELKS, to
# encourage the use of common node numbers when these devices are eventually
# implemented.
#
# Where different node numbers are currently used by ELKS, the current ELKS
# node numbers are generated by lines labelled "Currently" and the relevant
# Linux node numbers are generated by lines labelled "Ought to be".
#
# Refer to the MAKESET command, also in this directory, for usage details.
LINK=/bin/ln
MKDEV=/bin/mknod
MKSET=./MAKESET
##############################################################################
# Ensure required auxilliary script is present.
if ! test -f "$MKSET"
then
echo ERROR: \"$MKSET\" script missing, unable to continue.
exit 1
fi
##############################################################################
# Create memory devices.
$MKDEV mem c 1 1
$MKDEV kmem c 1 2
$MKDEV null c 1 3
# $MKDEV port c 1 4
$MKDEV zero c 1 5
# $MKDEV core c 1 6
$MKDEV full c 1 7
# $MKDEV random c 1 8
# $MKDEV urandom c 1 9
# $MKDEV aio c 1 10
##############################################################################
# RAM disks.
$MKSET 0 7 $MKDEV ram b 1
$LINK ram1 ramdisk
##############################################################################
# Pseudo-TTY master devices. These are not yet supported by the ELKS kernel.
# $MKSET 0 15 $MKDEV ptyp x 2
# $MKSET 16 15 $MKDEV ptyq x 2
# $MKSET 32 15 $MKDEV ptyr x 2
# $MKSET 48 15 $MKDEV ptys x 2
# $MKSET 64 15 $MKDEV ptyt x 2
# $MKSET 80 15 $MKDEV ptyu x 2
# $MKSET 96 15 $MKDEV ptyv x 2
# $MKSET 112 15 $MKDEV ptyw x 2
# $MKSET 128 15 $MKDEV ptyx x 2
# $MKSET 144 15 $MKDEV ptyy x 2
# $MKSET 160 15 $MKDEV ptyz x 2
# $MKSET 176 15 $MKDEV ptya x 2
# $MKSET 192 15 $MKDEV ptyb x 2
# $MKSET 208 15 $MKDEV ptyc x 2
# $MKSET 224 15 $MKDEV ptyd x 2
# $MKSET 240 15 $MKDEV ptye x 2
##############################################################################
# Floppy diskettes. Only the auto-detect nodes are listed.
$MKDEV fd0 b 3 128 # Currently.
$MKDEV fd1 b 3 192 # Currently.
# $MKSET 0 3 $MKDEV fd b 2 # Ought to be.
##############################################################################
# Pseudo-TTY master devices. These are not yet supported by the ELKS kernel.
# $MKSET 0 15 $MKDEV ttyp x 3
# $MKSET 16 15 $MKDEV ttyq x 3
# $MKSET 32 15 $MKDEV ttyr x 3
# $MKSET 48 15 $MKDEV ttys x 3
# $MKSET 64 15 $MKDEV ttyt x 3
# $MKSET 80 15 $MKDEV ttyu x 3
# $MKSET 96 15 $MKDEV ttyv x 3
# $MKSET 112 15 $MKDEV ttyw x 3
# $MKSET 128 15 $MKDEV ttyx x 3
# $MKSET 144 15 $MKDEV ttyy x 3
# $MKSET 160 15 $MKDEV ttyz x 3
# $MKSET 176 15 $MKDEV ttya x 3
# $MKSET 192 15 $MKDEV ttyb x 3
# $MKSET 208 15 $MKDEV ttyc x 3
# $MKSET 224 15 $MKDEV ttyd x 3
# $MKSET 240 15 $MKDEV ttye x 3
##############################################################################
# Direct IDE disks, Primary channel.
$MKSET 0 15 $MKDEV hda b 5 # Currently.
$MKSET 16 15 $MKDEV hdb b 5 # Currently.
# $MKSET 0 63 $MKDEV hda b 3 # Ought to be.
# $MKSET 64 63 $MKDEV hdb b 3 # Ought to be.
##############################################################################
# Virtual consoles. Note that tty4 through tty7 can't be enabled at this
# time because of the possible conflict with ttyS0 through ttyS3 which
# used to use the node numbers these now use. However, it is expected that
# this restriction can be removed in the near future.
$MKSET 0 3 $MKDEV tty c 4 # Currently
# $MKSET 0 15 $MKDEV tty c 4 # Soon to be
# Serial ports, as detected by the ROM BIOS.
$MKSET 64 3 $MKDEV ttyS c 4
##############################################################################
# Alternate TTY devices. These are not yet supported.
# $MKDEV tty c 5 0
# $MKDEV console c 5 1
# $MKDEV ptmx c 5 2
##############################################################################
# Parallel devices, as detected by the ROM BIOS.
$MKSET 0 3 $MKDEV lp c 6
##############################################################################
# Loopback devices. These are not yet supported.
# $MKSET 0 15 $MKDEV loop c 7
##############################################################################
# SCSI disks. These are not yet supported.
# $MKSET 0 15 $MKDEV sda b 8
# $MKSET 16 15 $MKDEV sdb b 8
# $MKSET 32 15 $MKDEV sdc b 8
# $MKSET 48 15 $MKDEV sdd b 8
# $MKSET 64 15 $MKDEV sde b 8
# $MKSET 80 15 $MKDEV sdf b 8
# $MKSET 96 15 $MKDEV sdg b 8
# $MKSET 112 15 $MKDEV sdh b 8
# $MKSET 128 15 $MKDEV sdi b 8
# $MKSET 144 15 $MKDEV sdj b 8
# $MKSET 160 15 $MKDEV sdk b 8
# $MKSET 176 15 $MKDEV sdl b 8
# $MKSET 192 15 $MKDEV sdm b 8
# $MKSET 208 15 $MKDEV sdn b 8
# $MKSET 224 15 $MKDEV sdo b 8
# $MKSET 240 15 $MKDEV sdp b 8
##############################################################################
# SCSI tapes. These are not yet supported.
# $MKSET 0 31 $MKDEV st c 9
# $MKSET 32 31 $MKDEV st c 9 l
# $MKSET 64 31 $MKDEV st c 9 m
# $MKSET 96 31 $MKDEV st c 9 a
# $MKSET 128 31 $MKDEV nst c 9
# $MKSET 160 31 $MKDEV nst c 9 l
# $MKSET 192 31 $MKDEV nst c 9 m
# $MKSET 224 31 $MKDEV nst c 9 a
##############################################################################
# Metadisk (RAID) devices. These are not yet supported.
# $MKSET 0 15 $MKDEV md b 9
##############################################################################
# SCSI CD-ROM devices. These are not yet supported.
# $MKSET 0 15 $MKDEV scd b 11
##############################################################################
# MSCDEX CD-ROM devices. These are not yet supported.
# $MKSET 0 15 $MKDEV doscd b 12
##############################################################################
# 8-bit MFM/RLL controllers. These are not yet supported.
# $MKSET 0 63 $MKDEV xda b 13
# $MKSET 64 63 $MKDEV xdb b 13
##############################################################################
# BIOS hard disks.
$MKSET 0 15 $MKDEV bda b 3 # Currently
$MKSET 16 15 $MKDEV bdb b 3 # Currently
$MKSET 32 15 $MKDEV bdc b 3 # Currently
$MKSET 48 15 $MKDEV bdd b 3 # Currently
# $MKSET 0 63 $MKDEV bda b 14 # Ought to be
# $MKSET 64 63 $MKDEV bdb b 14 # Ought to be
# $MKSET 128 63 $MKDEV bdc b 14 # Ought to be
# $MKSET 192 63 $MKDEV bdd b 14 # Ought to be
##############################################################################
# Joysticks. These are not yet supported.
# $MKSET 0 15 $MKDEV js c 15
# $MKSET 128 15 $MKDEV djs c 15
##############################################################################
# Generic SCSI devics. These are not yet supported.
# $MKSET 0 15 $MKDEV sg c 21
##############################################################################
# Direct IDE disks, Secondary channel. These are not yet supported.
# $MKSET 0 63 $MKDEV hdc b 22
# $MKSET 64 63 $MKDEV hdd b 22
##############################################################################
# Direct IDE disks, Tertiary channel. These are not yet supported.
# $MKSET 0 63 $MKDEV hde b 33
# $MKSET 64 63 $MKDEV hdf b 33
##############################################################################
# Z80-SIO devices. These are not yet supported.
# $MKSET 0 7 $MKDEV scc c 34
##############################################################################
# Direct IDE disks, Quaternary channel. These are not yet supported.
# $MKSET 0 63 $MKDEV hde b 34
# $MKSET 64 63 $MKDEV hdf b 34
##############################################################################
# Direct IDE disks, Quinternary channel. These are not yet supported.
# $MKSET 0 63 $MKDEV hdg b 56
# $MKSET 64 63 $MKDEV hdh b 56
##############################################################################
# Direct IDE disks, Quaternary channel. These are not yet supported.
# $MKSET 0 63 $MKDEV hdi b 57
# $MKSET 64 63 $MKDEV hdj b 57
##############################################################################
# SCSI Media Changer. These are not yet supported.
# $MKSET 0 15 $MKDEV sch c 86
##############################################################################
# I2C bus drivers. These are not yet supported.
# $MKSET 0 7 $MKDEV i2c c 89
##############################################################################
# Conrad Electronic Parallel Port Radio Clocks. These are not yet supported.
# $MKSET 0 1 $MKDEV pcfclock c 181
##############################################################################
# EOF.
next reply other threads:[~2004-02-29 16:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-29 16:53 Tommy McCabe [this message]
2004-03-02 11:46 ` Whoops!! Paul Nasrat
-- strict thread matches above, loose matches on Subject: below --
2004-07-13 13:18 Whoops! Tommy McCabe
2004-07-27 13:54 ` Whoops! Miguel Bolanos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040229165339.62270.qmail@web11703.mail.yahoo.com \
--to=rocketjet314@yahoo.com \
--cc=linux-8086@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox