Re: Elks freeze after login [machine config]

[Pat Gilliland <gilliland@sympatico.ca>]

Harry Kalogirou wrote:
<snip> 
> My machine for ELKS is a :
> 
> 8086
> 640KB RAM
> 40MB hard disk
> 1 serial port, 1 parallel
> a PS/2 port

Mine:
8088
640k
what's a hard drive? ;)
2x 720 floppy
1 serial 1 parallel


> I am running ELKS 0.1.1-pre$ (the latest from the CVS) on it. It is
> connected with a null modem serial cable to my linux based gateway using
> CSLIP at 9600bps. The root partition is around 30MB and I also have an
> 1MB swap partition. I'm also running on it constanly a web server(for
> the fun of it, since with swap we don't have memory shortage problems),
> serving a copy of the ELKS web site. I also use the web server to get
> files I need from it. To get files to the ELKS machine I use urlget.

How did you configure the web server? I could not find any documentation
on the httpd included with 0.1.0.
 

Pat Gilliland

-- 
This communication is intended to be received only by the individual or
entity to whom or to which it is addressed and contains information that
is
privileged and confidential.  Any unauthorized use, copying, review or
disclosure is prohibited.  Please notify the sender immediately if you
have
received this communication in error.

Contents of this message Copyright 2001 Patrick Gilliland