From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Neil Holmes" Subject: Elks Distribution Date: Tue, 28 May 2002 18:44:39 +0100 Sender: linux-8086-owner@vger.kernel.org Message-ID: Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: Linux 8086 You might have seen that my development version is now single floppy. I have achieved this by booting 0.0.82 kernel but installing 0.1.0 kernel to the hard drive. It all works fine and its a bit of a head slap on my part that I didn't think of it before. I already had 2 kernels on what was disk 2. The root/boot floppy kernel and the final installed kernel. I have replaced the 0.1.0 root/boot floppy kernel and all is fine. I have also stopped the install requesting a login. However I am not too keen on the way I have done it and suspect that I might need some sort of a change somewhere along the line to properly implement this feature. I have "tweaked" getty to allow me in. The source code to the install disk getty is in the dev download area too. I would appreciate some feedback on what will, ultimately, be the best way to achieve this. Have fun. Thanks Neil