From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Neil Holmes" Subject: RE: Elks Distribution on Bochs 1.4 Date: Tue, 28 May 2002 18:39:08 +0100 Sender: linux-8086-owner@vger.kernel.org Message-ID: References: Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: List-Id: Content-Type: text/plain; charset="us-ascii" To: Michael McConnell Cc: Linux 8086 Thats great news Michael. I am pleased that to hear that you are up and running. Let me know if you find any problems with your installation. Keep your eyes open for upgrades. My current development version (which will become 0.0.4 in due course) is now installing from a single floppy disk. Its also not asking for a login at the start. It goes straight into the installation. Thanks Neil -----Original Message----- From: Michael McConnell [mailto:soruk@eridani.co.uk] Sent: 28 May 2002 18:13 To: Neil Holmes Subject: RE: Elks Distribution on Bochs 1.4 On Tue, 28 May 2002, Neil Holmes wrote: > Please keep me posted. I had an invalid floppy delay count - yours was 500, mine was 100 times that! Setting it to 500 made it work. Whee. I now have an ELKS bochs ;-) > Thanks > > Neil > > -----Original Message----- > From: Michael McConnell [mailto:soruk@eridani.co.uk] > Sent: 28 May 2002 14:14 > To: Neil Holmes > Subject: Re: Elks Distribution on Bochs 1.4 > > > [Not sent to the list] > > Thanks for that, I'll give it a try. > > The HD image my bochs setup is currently using is a 504Mb file (1024/16/63) > which works fine with a normal Linux installation (albeit very slowly). > > I'll try with a smaller one such as described in the config file you emailed > me, and see if that works. > > (I note that ELKS picked it up as 1022/16/63 not 1024.. wonder if that has > anything to do with it?) > > > On Tue, 28 May 2002, Neil Holmes wrote: > > > Hi Michael, > > > > I have installed the Elks Distribution on Bochs ok now. I have attached my > > confirguration file for your consideration. I wasn't sure how to create a > > disk file in Bochs so I borrowed the hdimage.test file from dosemu. > > > > As per my initial instructions I have found that its best to use dos fdisk > > to create a partition to start with. I tried without and the install > failed. > > > > A reminder that 0.0.3 is available for download and thats the version that > I > > tested with. > > > > Thanks > > > > Neil > > > > -- Michael "Soruk" McConnell [Eridani Linux 6.3 Now!] > Eridani Linux -- The Most Up-to-Date Red Hat-based Linux CDROMs Available > Email: linux@eridani.co.uk http://www.eridani.co.uk Fax: +44-8701-600807 > "No. 'Eureka' is Greek for 'This bath is too hot.'" - Dr Who. > > > > -- Michael "Soruk" McConnell [Eridani Linux 6.3 Now!] Eridani Linux -- The Most Up-to-Date Red Hat-based Linux CDROMs Available Email: linux@eridani.co.uk http://www.eridani.co.uk Fax: +44-8701-600807 "No. 'Eureka' is Greek for 'This bath is too hot.'" - Dr Who.