sleep/suspend and reboot events

sleep/suspend and reboot events

[Polevoy, IgorX]

Hi,
I've got acpi installed on RH with vanilla kernel 2.4.20 and patch 20021212.
Also, I installed acpid v. 1.0.1 and event/action files to catch all the
events.
In the meantime I'm getting only Power Button Event.

However, I'm interested in getting Suspend/Standby events as well.
Why I do not receive them? 

Another question: Is it possible to get Reset Button Event? Reboot event
notification with ACPI?

Thanks,
Igor.

dmesg for ACPI following:

8000000 (ACPI NVS)
ACPI: have wakeup address 0xc0002000
ACPI: RSDP (v000 ASUS                       ) @ 0x000f8010
ACPI: RSDT (v001 ASUS   P2B-N    22616.11825) @ 0x07ffd000
ACPI: FADT (v001 ASUS   P2B-N    22616.11825) @ 0x07ffd080
ACPI: BOOT (v001 ASUS   P2B-N    22616.11825) @ 0x07ffd040
ACPI: DSDT (v001   ASUS P2B-N    00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: auto BOOT_IMAGE=linux-2.4.20 ro root=302
BOOT_FILE=/boot/vmlinuz-2.4.20 apm=off acpi=on
ACPI: Subsystem revision 20021212
 tbxface-0099 [03] Acpi_load_tables      : ACPI Tables successfully acquired
ACPI Namespace successfully loaded at root c041525c
evxfevnt-0074 [04] Acpi_enable           : Transition to ACPI mode
successful
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2)


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

RE: sleep/suspend and reboot events

[Adachi, Kenichi]

Hi,

> However, I'm interested in getting Suspend/Standby events as well.
> Why I do not receive them? 
> 

Going to System Sleep state is not PM Event but PM Action.
PM Event such as pressing button or XXX Minutes System Idle etc. can
trigger PM Action depending on your PM Policy.

You could record the occurrence of PM Action right before you really
initiate it though.

Thanks,
- Adachi, Kenichi



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf