From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richie Bielak Subject: RE: ACPI on Fujitsu S-Lifebook Date: Fri, 03 Jan 2003 18:17:55 -0500 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <1041635876.1217.2.camel@fuji> References: Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7BIT Return-path: In-reply-to: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: "Grover, Andrew" Cc: apci List-Id: linux-acpi@vger.kernel.org On Fri, 2003-01-03 at 14:02, Grover, Andrew wrote: > > Do you see any messages about found thermal zones in your dmesg? If not, > then it is as simple as no thermal zones or fans were detected on your > system. > > Regards -- Andy > Here is the ACPI messages from dmesg. There are no messages about thermal entries. Should these be detected? Where is the code that does the detection? Thanks! ...richie ACPI: have wakeup address 0xc0001000 ACPI: RSDP (v000 FUJ ) @ 0x000f6200 ACPI: RSDT (v001 FUJ CLOVE 00261.00000) @ 0x0f6ea447 ACPI: FADT (v001 FUJ CLOVE 00261.00000) @ 0x0f6efb8c ACPI: DSDT (v001 FUJ CLOVE 00261.00000) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Subsystem revision 20021212 tbxface-0099 [03] Acpi_load_tables : ACPI Tables successfully acquired ACPI Namespace successfully loaded at root c032fe3c evxfevnt-0074 [04] Acpi_enable : Transition to ACPI mode successful ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 23) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 PCI: Using ACPI for IRQ routing ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2 C3, 2 performance states) ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf