From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jurgen Kramer Subject: RE: Power button doesn't give events (Asus TUSL2-C) Date: 10 Jan 2003 21:13:50 +0100 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <1042229630.963.8.camel@paragon.slim> References: Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: "Grover, Andrew" Cc: acpi-devel List-Id: linux-acpi@vger.kernel.org On Fri, 2003-01-10 at 19:32, Grover, Andrew wrote: > Does the output from /proc/interrupts list ACPI anywhere? Output from cat /proc/interrupts: CPU0 0: 43542 IO-APIC-edge timer 1: 1202 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 1 IO-APIC-edge rtc 9: 2186 IO-APIC-level acpi 14: 11092 IO-APIC-edge ide0 15: 2 IO-APIC-edge ide1 16: 31845 IO-APIC-level nvidia 18: 5752 IO-APIC-level EMU10K1 19: 5836 IO-APIC-level usb-uhci 20: 33097143 IO-APIC-level eth0 21: 1 IO-APIC-level ohci1394 23: 7 IO-APIC-level usb-uhci, eth1 NMI: 0 LOC: 43492 ERR: 0 MIS: 0 > Does the interrupt count increase by 1 every time you press a power > button? The interrupt count from irq 9 doesn't change when a press the power button. It doesn't seem the change ever. On my other working systems (which are non APIC btw) the interrupt count for the ACPI irq changes regularly. > What does your dmesg say about discovered buttons? [root@paragon root]# dmesg |grep Button ACPI: Power Button (FF) [PWRF] Hope this helps. Cheers, Jurgen ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com