RE: Power on at specified time.

[Nigel Cunningham <ncunningham-oKK1aGe2n869koe0gwxAeg@public.gmane.org>]

Thanks, Andy.

I'd just about forgotten about this topic :> I'll give it a go after I
finish the port of Florent's swsusp to 2.5.

Regards,

Nigel

On Fri, 2003-03-14 at 14:02, Grover, Andrew wrote:
> > From: Nigel Cunningham [mailto:ncunningham-oKK1aGe2n869koe0gwxAeg@public.gmane.org] 
> > On Wed, 2003-02-19 at 13:09, Grover, Andrew wrote:
> > > Well, go fix it and send me a patch! :)
> > > 
> > > Seriously, Pat roughed-in the alarm support a long long 
> > time ago, but it
> > > needs someone to take another look at it and get it fully 
> > functional.
> > 
> > Gladly, but I wanted to make sure I wasn't barking up the wrong tree
> > first, and then I need a push in right direction (toward some
> > documentation!).
> 
> Go check out include/linux/mc146818rtc.h. Using this plus the existing
> code plus a recent ICH datasheet available on developer.intel.com (I
> recommend ICH3m's - section 9.6 is "Real Time Clock Registers") you
> should be able to get started.
> 
> Hope this helps -- Regards -- Andy



-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! 
Get cracking and register here for some mind boggling fun and 
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en