public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
* s3 crashes Dell X200 on 2.6.0-test9/ACPI 20031002
@ 2003-11-02 22:34 Scott T. Smith
  0 siblings, 0 replies; only message in thread
From: Scott T. Smith @ 2003-11-02 22:34 UTC (permalink / raw)
  To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f

I'm trying to use S3 on my Dell X200.  I have tried both

echo 3 > /proc/acpi/sleep
and
echo -n mem > /sys/power/state

It shuts down appropriately (I think), but refuses to come back. 
Pressing the power button does nothing.  Holding the power button down
does nothing.  In fact, the only way I can use my computer again is to
unplug the power and battery, wait 5+ minutes, and then plug it back in.

If I do this with the battery plugged in, usually the battery charging
light comes on and stays on.

If I do this in text mode, I can see it print 3 lines and then vanish. 
The first line looks like it has a bunch of '+' and/or '-'; I have no
idea what the other two lines look like.

Something tells me this is a bug in the DSDT, but I honestly have no
idea.  And debugging is obviously quite difficult.  Any idea what I'm
doing wrong, or what I should look for?

My configuration is:

Dell X200 (Pentium M3), with the A09 bios (latest on Dell's website; had
the same effect with the older BIOS I was running before)

2.6.0-test9 kernel with Andrew Morton patches (as delivered by Gentoo;
includes ACPI 20031002)

ACPI patch for custom DSDT (tried with and without the custom DSDT, same
effect)

/proc/acpi/sleep: S0 S3 S4 S5 

egrep "ACPI|APIC|MCE" /etc/kernels/config-2.6.0-test9-mm1 
CONFIG_X86_GOOD_APIC=y
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
# Power management options (ACPI, APM)
# ACPI (Advanced Configuration and Power Interface) Support
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set

ACPI is not compiled as a module (duh)


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?   SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2003-11-02 22:34 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-11-02 22:34 s3 crashes Dell X200 on 2.6.0-test9/ACPI 20031002 Scott T. Smith

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox