From mboxrd@z Thu Jan 1 00:00:00 1970 From: Len Brown Subject: Re: Shuttle HOT-591P fails ACPI on 2.4.23 Date: 08 Dec 2003 10:14:20 -0500 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <1070896460.2407.15.camel@dhcppc4> References: <20031208122424.GA18539@dbz.icequake.net> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20031208122424.GA18539-eRi7t0xs5gloIlNlpBNreQ@public.gmane.org> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Ryan Underwood Cc: ACPI Developers List-Id: linux-acpi@vger.kernel.org Has ACPI worked better on this box using any other releases? Does it work any better if you boot with "acpi_pic_sci=edge"? I'd be interested in seing the complete dmesg -s40000 output and the resulting /proc/interrupts. thanks, -Len On Mon, 2003-12-08 at 07:24, Ryan Underwood wrote: > Hello, > > Shuttle HOT-591P with latest BIOS (591P025) and Cyrix CPU, kernel > 2.4.23. It is a Baby AT board with AT and ATX power. > > Vendor: Award Software International, Inc. > Version: 4.51 PG > Release Date: 03/27/01 > > Manufacturer: Shuttle Inc. > Product Name: VIA APOLLO MVP3 (HOT-597) > Version: 2A5LEH2B > (It is actually a 591P, regardless of the DMI string) > > It seems the ACPI tables are found, but the system does not properly > handle the SCI interrupt: > > ACPI: Subsystem revision 20031002 > PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3D1 > PCI: Using configuration type 1 > tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired > Parsing all Control Methods:....................................................... > Table [DSDT](id F004) - 227 Objects with 26 Devices 55 Methods 17 Regions > ACPI Namespace successfully loaded at root c02dba3c > ACPI: IRQ9 SCI: Level Trigger. <---- PAUSES HERE > evxfevnt-0089: *** Error: Could not transition to ACPI mode. > utxface-0170 [03] acpi_enable_subsystem : acpi_enable failed. > ACPI: Unable to start the ACPI Interpreter > evxfevnt-0127 [06] acpi_disable : System is already in legacy (non-ACPI) mode > utalloc-0986 [05] ut_dump_allocations : No outstanding allocations. > PCI: Probing PCI hardware > PCI: ACPI tables contain no PCI IRQ routing entries > ... > > At the "ACPI: IRQ9 SCI:" part, it pauses for a few seconds before > continuing. > > A similar system with a Tyan ATX board and K6/III 400 works great. > > any ideas? ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/