public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
* Shuttle HOT-591P fails ACPI on 2.4.23
@ 2003-12-08 12:24 Ryan Underwood
       [not found] ` <20031208122424.GA18539-eRi7t0xs5gloIlNlpBNreQ@public.gmane.org>
  0 siblings, 1 reply; 9+ messages in thread
From: Ryan Underwood @ 2003-12-08 12:24 UTC (permalink / raw)
  To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f

[-- Attachment #1: Type: text/plain, Size: 1593 bytes --]


Hello,

Shuttle HOT-591P with latest BIOS (591P025) and Cyrix CPU, kernel
2.4.23.  It is a Baby AT board with AT and ATX power.

Vendor: Award Software International, Inc.
Version: 4.51 PG
Release Date: 03/27/01

Manufacturer: Shuttle Inc.
Product Name: VIA APOLLO MVP3 (HOT-597)
Version: 2A5LEH2B
(It is actually a 591P, regardless of the DMI string)

It seems the ACPI tables are found, but the system does not properly
handle the SCI interrupt:

ACPI: Subsystem revision 20031002
PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3D1
PCI: Using configuration type 1
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:.......................................................
Table [DSDT](id F004) - 227 Objects with 26 Devices 55 Methods 17 Regions
ACPI Namespace successfully loaded at root c02dba3c
ACPI: IRQ9 SCI: Level Trigger.  <---- PAUSES HERE
evxfevnt-0089: *** Error: Could not transition to ACPI mode.
 utxface-0170 [03] acpi_enable_subsystem : acpi_enable failed.
ACPI: Unable to start the ACPI Interpreter
evxfevnt-0127 [06] acpi_disable          : System is already in legacy (non-ACPI) mode
 utalloc-0986 [05] ut_dump_allocations   : No outstanding allocations.
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
...

At the "ACPI: IRQ9 SCI:" part, it pauses for a few seconds before
continuing.

A similar system with a Tyan ATX board and K6/III 400 works great.

any ideas?

-- 
Ryan Underwood, <nemesis-RBwgCYbvQ+vk1uMJSBkQmQ@public.gmane.org>

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread
* RE: Shuttle HOT-591P fails ACPI on 2.4.23
@ 2003-12-10  2:40 Yu, Luming
       [not found] ` <3ACA40606221794F80A5670F0AF15F8401720C14-SRlDPOYGfgogGBtAFL8yw7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
  0 siblings, 1 reply; 9+ messages in thread
From: Yu, Luming @ 2003-12-10  2:40 UTC (permalink / raw)
  To: Ryan Underwood, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f

It's too bad that your box faile to transition to ACPI mode. Did you boot MS windows successfully on your box?
BTW, I need full ouptput of acpidmp. --Luming


-----Original Message-----
From: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org [mailto:acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org]On Behalf Of Ryan Underwood
Sent: 2003?12?9? 12:51
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [ACPI] Shuttle HOT-591P fails ACPI on 2.4.23



Hi,

This is the first time I have booted an ACPI-enabled kernel on this
machine.  So I wasn't expecting too much. ;)

Shuttle's spec page for the board: http://de.shuttle.com/591p.htm
does claim to support ACPI.

I attached the files you asked for.  acpi_pic_sci=edge didn't seem to
make a difference (paused in same place, and same error)


On Mon, Dec 08, 2003 at 10:14:20AM -0500, Len Brown wrote:
> Has ACPI worked better on this box using any other releases?
> 
> Does it work any better if you boot with "acpi_pic_sci=edge"?
> 
> I'd be interested in seing the complete dmesg -s40000 output
> and the resulting /proc/interrupts.
> 
> thanks,
> -Len
> 
> On Mon, 2003-12-08 at 07:24, Ryan Underwood wrote:
> > Hello,
> > 
> > Shuttle HOT-591P with latest BIOS (591P025) and Cyrix CPU, kernel
> > 2.4.23.  It is a Baby AT board with AT and ATX power.
> > 
> > Vendor: Award Software International, Inc.
> > Version: 4.51 PG
> > Release Date: 03/27/01
> > 
> > Manufacturer: Shuttle Inc.
> > Product Name: VIA APOLLO MVP3 (HOT-597)
> > Version: 2A5LEH2B
> > (It is actually a 591P, regardless of the DMI string)
> > 
> > It seems the ACPI tables are found, but the system does not properly
> > handle the SCI interrupt:
> > 
> > ACPI: Subsystem revision 20031002
> > PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3D1
> > PCI: Using configuration type 1
> >  tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
> > Parsing all Control Methods:.......................................................
> > Table [DSDT](id F004) - 227 Objects with 26 Devices 55 Methods 17 Regions
> > ACPI Namespace successfully loaded at root c02dba3c
> > ACPI: IRQ9 SCI: Level Trigger.  <---- PAUSES HERE
> > evxfevnt-0089: *** Error: Could not transition to ACPI mode.
> >  utxface-0170 [03] acpi_enable_subsystem : acpi_enable failed.
> > ACPI: Unable to start the ACPI Interpreter
> > evxfevnt-0127 [06] acpi_disable          : System is already in legacy (non-ACPI) mode
> >  utalloc-0986 [05] ut_dump_allocations   : No outstanding allocations.
> > PCI: Probing PCI hardware
> > PCI: ACPI tables contain no PCI IRQ routing entries
> > ...
> > 
> > At the "ACPI: IRQ9 SCI:" part, it pauses for a few seconds before
> > continuing.
> > 
> > A similar system with a Tyan ATX board and K6/III 400 works great.
> > 
> > any ideas?
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/acpi-devel
> 

-- 
Ryan Underwood, <nemesis-RBwgCYbvQ+vk1uMJSBkQmQ@public.gmane.org>


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/

^ permalink raw reply	[flat|nested] 9+ messages in thread
* RE: Shuttle HOT-591P fails ACPI on 2.4.23
@ 2003-12-10 16:26 Brown, Len
  0 siblings, 0 replies; 9+ messages in thread
From: Brown, Len @ 2003-12-10 16:26 UTC (permalink / raw)
  To: Ryan Underwood, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f

> evxfevnt-0089: *** Error: Could not transition to ACPI mode.
> utxface-0170 [03] acpi_enable_subsystem : acpi_enable failed.
> ACPI: Unable to start the ACPI Interpreter

The pause must be the 3000 retries in acpi_hw_set_mode().

Please file a bug with acpidmp output attached.
We'll need to take a look at the FADT and probably instrument
your kernel to figure out why it isn't working.
(I assume that Win 2k or Win XP is able to run in ACPI mode on this
box?)

Thanks,
-Len

How to file a bug against ACPI:

http://bugzilla.kernel.org/ Category: Power Management, Component: ACPI

Please attach dmesg -s40000 output (or serial console log if dmesg
unavailable)
Please attach copy of /proc/interrupts if possible

Please attach the output from acpidmp, available in /usr/sbin/, or in
pmtools:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

Please attach the output from dmidecode, available in /usr/sbin/, or
here: 
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

Please file a bug and include the putput
> -----Original Message-----
> From: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org 
> [mailto:acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of 
> Ryan Underwood
> Sent: Monday, December 08, 2003 11:51 PM
> To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> Subject: Re: [ACPI] Shuttle HOT-591P fails ACPI on 2.4.23
> 
> 
> 
> Hi,
> 
> This is the first time I have booted an ACPI-enabled kernel on this
> machine.  So I wasn't expecting too much. ;)
> 
> Shuttle's spec page for the board: http://de.shuttle.com/591p.htm
> does claim to support ACPI.
> 
> I attached the files you asked for.  acpi_pic_sci=edge didn't seem to
> make a difference (paused in same place, and same error)
> 
> 
> On Mon, Dec 08, 2003 at 10:14:20AM -0500, Len Brown wrote:
> > Has ACPI worked better on this box using any other releases?
> > 
> > Does it work any better if you boot with "acpi_pic_sci=edge"?
> > 
> > I'd be interested in seing the complete dmesg -s40000 output
> > and the resulting /proc/interrupts.
> > 
> > thanks,
> > -Len
> > 
> > On Mon, 2003-12-08 at 07:24, Ryan Underwood wrote:
> > > Hello,
> > > 
> > > Shuttle HOT-591P with latest BIOS (591P025) and Cyrix CPU, kernel
> > > 2.4.23.  It is a Baby AT board with AT and ATX power.
> > > 
> > > Vendor: Award Software International, Inc.
> > > Version: 4.51 PG
> > > Release Date: 03/27/01
> > > 
> > > Manufacturer: Shuttle Inc.
> > > Product Name: VIA APOLLO MVP3 (HOT-597)
> > > Version: 2A5LEH2B
> > > (It is actually a 591P, regardless of the DMI string)
> > > 
> > > It seems the ACPI tables are found, but the system does 
> not properly
> > > handle the SCI interrupt:
> > > 
> > > ACPI: Subsystem revision 20031002
> > > PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3D1
> > > PCI: Using configuration type 1
> > >  tbxface-0117 [03] acpi_load_tables      : ACPI Tables 
> successfully acquired
> > > Parsing all Control 
> Methods:.......................................................
> > > Table [DSDT](id F004) - 227 Objects with 26 Devices 55 
> Methods 17 Regions
> > > ACPI Namespace successfully loaded at root c02dba3c
> > > ACPI: IRQ9 SCI: Level Trigger.  <---- PAUSES HERE
> > > evxfevnt-0089: *** Error: Could not transition to ACPI mode.
> > >  utxface-0170 [03] acpi_enable_subsystem : acpi_enable failed.
> > > ACPI: Unable to start the ACPI Interpreter
> > > evxfevnt-0127 [06] acpi_disable          : System is 
> already in legacy (non-ACPI) mode
> > >  utalloc-0986 [05] ut_dump_allocations   : No outstanding 
> allocations.
> > > PCI: Probing PCI hardware
> > > PCI: ACPI tables contain no PCI IRQ routing entries
> > > ...
> > > 
> > > At the "ACPI: IRQ9 SCI:" part, it pauses for a few seconds before
> > > continuing.
> > > 
> > > A similar system with a Tyan ATX board and K6/III 400 works great.
> > > 
> > > any ideas?
> > 
> > 
> > 
> > -------------------------------------------------------
> > This SF.net email is sponsored by: SF.net Giveback Program.
> > Does SourceForge.net help you be more productive?  Does it
> > help you create better code?  SHARE THE LOVE, and help us help
> > YOU!  Click Here: http://sourceforge.net/donate/
> > _______________________________________________
> > Acpi-devel mailing list
> > Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> > https://lists.sourceforge.net/lists/listinfo/acpi-devel
> > 
> 
> -- 
> Ryan Underwood, <nemesis-RBwgCYbvQ+vk1uMJSBkQmQ@public.gmane.org>
> 


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/

^ permalink raw reply	[flat|nested] 9+ messages in thread
[parent not found: <BF1FE1855350A0479097B3A0D2A80EE0CC88E1@hdsmsx402.hd.intel.com>]
end of thread, other threads:[~2003-12-10 21:11 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-08 12:24 Shuttle HOT-591P fails ACPI on 2.4.23 Ryan Underwood
     [not found] ` <20031208122424.GA18539-eRi7t0xs5gloIlNlpBNreQ@public.gmane.org>
2003-12-08 15:14   ` Len Brown
     [not found]     ` <1070896460.2407.15.camel-D2Zvc0uNKG8@public.gmane.org>
2003-12-09  4:50       ` Ryan Underwood
  -- strict thread matches above, loose matches on Subject: below --
2003-12-10  2:40 Yu, Luming
     [not found] ` <3ACA40606221794F80A5670F0AF15F8401720C14-SRlDPOYGfgogGBtAFL8yw7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
2003-12-10 10:41   ` Ryan Underwood
     [not found]     ` <20031210104157.GC31759-eRi7t0xs5gloIlNlpBNreQ@public.gmane.org>
2003-12-10 18:33       ` Len Brown
     [not found]         ` <1071081182.2543.68.camel-D2Zvc0uNKG8@public.gmane.org>
2003-12-10 20:55           ` Ryan Underwood
2003-12-10 16:26 Brown, Len
     [not found] <BF1FE1855350A0479097B3A0D2A80EE0CC88E1@hdsmsx402.hd.intel.com>
     [not found] ` <BF1FE1855350A0479097B3A0D2A80EE0CC88E1-N2PTB0HCzHJF3Yvz3xaN/VDQ4js95KgL@public.gmane.org>
2003-12-10 21:11   ` Ryan Underwood

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox