From: christian graf <chr.graf-Mmb7MZpHnFY@public.gmane.org>
To: Luca Capello <luca-wlebWZzHoyE@public.gmane.org>
Cc: ML ACPI-devel
<acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: Re: acpi_processor.c - kernel 2.6.1
Date: Sun, 18 Jan 2004 20:28:16 +0100 [thread overview]
Message-ID: <1074454096.719.29.camel@dragon> (raw)
In-Reply-To: <400ACAC3.1050504-wlebWZzHoyE@public.gmane.org>
Configure your 2.6.1 kernel
Power management options (ACPI,..)-> ACPI
->CPU-Frequency scaling -> and there you see all the "governors".
Include powersave, performance and set the Default CPUFreq governor to
userspace.
DOwn in the make menuconfig screen you have to choose your cpu wich fits
your system !
load the newly added modules and you should find either one of the
following options (depends on your configured modules):
echo 600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
or
echo 600000 > /proc/sys/cpu/0/speed
or
echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
the 600000 is just an example. check out your frequency range by:
if you have mounted your sysfs, you should see the dir (and your
frequency-range min, max):
/sys/devices/system/cpu/cpu0/cpufreq$ ls
cpuinfo_max_freq scaling_driver scaling_min_freq
cpuinfo_min_freq scaling_governor scaling_setspeed
scaling_available_governors scaling_max_freq
hope this helps
christian
Am So, den 18.01.2004 schrieb Luca Capello um 19:04:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hello,
>
> on 01/18/04 18:10, Mattia Dongili wrote:
> > no, it doesn't. Other cpufreq related daemons need it, not cpufreqd.
> thx, I didn't know this :-) So, I read the 'man' page and I found that
> it uses the ACPI/APM/PMU battery info and the 'cpufreq' driver...
>
> > you only load the code into the kernel, you can then use procfs to select
> > frequencies ang governor.
> Well, stupid question, but I can't find it: where are the 'governor'
> entries?
>
> Ciao (for the Italians), bye (for all the others),
> Gismo / Luca
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.4 (GNU/Linux)
> Comment: Using GnuPG with Debian - http://enigmail.mozdev.org
>
> iD8DBQFACsrCVAp7Xm10JmkRAuRlAJ4ohELCGFFGukKIqY0vAuYPPUmT5gCdFCiw
> 8+7vNAb27svwZvFMm3390ao=
> =+Jn0
> -----END PGP SIGNATURE-----
>
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/acpi-devel
>
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
next prev parent reply other threads:[~2004-01-18 19:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-17 23:43 acpi_processor.c - kernel 2.6.1 christian graf
[not found] ` <1074382993.674.24.camel-GKM3wtwTCu0@public.gmane.org>
2004-01-18 2:58 ` Ducrot Bruno
[not found] ` <20040118025845.GB25416-kk6yZipjEM5g9hUCZPvPmw@public.gmane.org>
2004-01-18 17:41 ` christian graf
[not found] ` <1074447711.719.13.camel-GKM3wtwTCu0@public.gmane.org>
2004-01-19 9:37 ` Dominik Brodowski
2004-01-18 11:18 ` Yury V. Umanets
[not found] ` <1074424728.1914.24.camel-YqzrDssuZYw@public.gmane.org>
2004-01-18 13:00 ` Luca Capello
[not found] ` <400A8381.2050607-wlebWZzHoyE@public.gmane.org>
2004-01-18 17:10 ` Mattia Dongili
[not found] ` <20040118171017.GF2375-MEqNC12sBsHxa7XIdbXXog@public.gmane.org>
2004-01-18 18:04 ` Luca Capello
[not found] ` <400ACAC3.1050504-wlebWZzHoyE@public.gmane.org>
2004-01-18 19:28 ` christian graf [this message]
2004-01-18 17:39 ` christian graf
2004-01-19 14:10 ` Ducrot Bruno
-- strict thread matches above, loose matches on Subject: below --
2004-01-18 8:14 Yu, Luming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1074454096.719.29.camel@dragon \
--to=chr.graf-mmb7mzphnfy@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=luca-wlebWZzHoyE@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox