No network after S3

[Peter.Zeipelt-zqRNUXuvxA0b1SvskN2V4Q@public.gmane.org]

Hello list

I hope this is the right place for my question.
Using an ABIT KT7-RAID with SuSE 8.2prof and the kernel 2.6.1 or 2.6.2
STR seems to work fine.
But trying to use network nothing really happens.
I tried out several NICs (3c905c, 100PRO/S and one with a 8139b).
When i try to ping another  host in the local net, all get is an
Destination Host unreachable.
The 8139b says "no buffer space available" .
A dmesg with the 3c905 says "IRQ blocked by another device?"
But there isn't any other device on this IRQ.
Un- and reloading the module doesn't help.
Trying the STR on an ASUS A7N8X with driver for the nforce NIC in the
kernel brings the same result.
Another strange thing to me is, that S3 and S4 are working better on
the old ABIT  board with Via KT133
chipset then on my newer nforce boards.
The ASUS didn't fall in S4 mode, cause it seems that the disks are
powered down before writing the RAM
on it.
An Enmic 8RDA+ doesn't boot after S3.
But for now my main problem is to bring the network to work after the
S3.
Any hints?

Thanks
Peter


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click