Re: No network after S3

[Peter.Zeipelt-zqRNUXuvxA0b1SvskN2V4Q@public.gmane.org]

Len,

thank `s for your advice.
I tried pci=noacpi. No diference.
If I understand you right, I should wait a little bit before dealing
with this
powersaving stuff.
You mentioned the bugzilla entries.
Can you tell me please where I can find them?
So I can see, if the problems there are similar to mine.

Peter

Len Brown schrieb:
> dunno why i didn't realize that you were talking about
> the NIC failing
> after resuming from S3, guess I didn't read the subject
> line;-)
> 
> Yes, we've got a number of bugzilla entries that show
> that somehow
> interrupts are toast after resume.  Perhaps this failure
> is the same as
> those?
> 
> -Len
> 
> On Sun, 2004-02-15 at 00:36, Len Brown wrote:
> > Peter,
> > Same NIC works with pci=noacpi or acpi=off?
> > If yes, then this is an ACPI bug.  If no, then the
> problem lies
> > elsewhere.
> > 
> > I'd defer dealing with the suspend/resume issues until
> more basic
> > functionality is working properly.
> > 
> > thanks,
> > -Len
> > 
> > 
> > On Sat, 2004-02-14 at 09:39, Peter.Zeipelt-zqRNUXuvxA0b1SvskN2V4Q@public.gmane.org
> wrote:
> > > Hello list
> > > 
> > > I hope this is the right place for my question.
> > > Using an ABIT KT7-RAID with SuSE 8.2prof and the
> kernel 2.6.1 or 2.6.2
> > > STR seems to work fine.
> > > But trying to use network nothing really happens.
> > > I tried out several NICs (3c905c, 100PRO/S and one
> with a 8139b).
> > > When i try to ping another  host in the local net,
> all get is an
> > > Destination Host unreachable.
> > > The 8139b says "no buffer space available" .
> > > A dmesg with the 3c905 says "IRQ blocked by another
> device?"
> > > But there isn't any other device on this IRQ.
> > > Un- and reloading the module doesn't help.
> > > Trying the STR on an ASUS A7N8X with driver for the
> nforce NIC in the
> > > kernel brings the same result.
> > > Another strange thing to me is, that S3 and S4 are
> working better on
> > > the old ABIT  board with Via KT133
> > > chipset then on my newer nforce boards.
> > > The ASUS didn't fall in S4 mode, cause it seems that
> the disks are
> > > powered down before writing the RAM
> > > on it.
> > > An Enmic 8RDA+ doesn't boot after S3.
> > > But for now my main problem is to bring the network
> to work after the
> > > S3.
> > > Any hints?
> > > 
> > > Thanks
> > > Peter
> > > 
> > > 
> > >
> -------------------------------------------------------
> > > SF.Net is sponsored by: Speed Start Your Linux Apps
> Now.
> > > Build and deploy apps & Web services for Linux with
> > > a free DVD software kit from IBM. Click Now!
> > >
> http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> > > _______________________________________________
> > > Acpi-devel mailing list
> > > Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> > >
> https://lists.sourceforge.net/lists/listinfo/acpi-devel
> > 
> > 
> > 
> >
> -------------------------------------------------------
> > SF.Net is sponsored by: Speed Start Your Linux Apps
> Now.
> > Build and deploy apps & Web services for Linux with
> > a free DVD software kit from IBM. Click Now!
> > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> > _______________________________________________
> > Acpi-devel mailing list
> > Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> >
> https://lists.sourceforge.net/lists/listinfo/acpi-devel
> 
>


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click