Re: No network after S3

[Peter Meier <crazy-b-Mmb7MZpHnFY@public.gmane.org>]

<snip>

I'm having the same problem that my network is dead after I resume from
S3, but I'm getting some kind of (maybe?) helpfull error message:

b44: eth0: BUG!  Timeout waiting for bit 80000000 of register 428 to
clear.
b44: eth0: BUG!  Timeout waiting for bit 80000000 of register 428 to
clear.

I can rmmod b44 then, and modprobe it again, which leads to the
following:

b44.c:v0.92 (Nov 4, 2003)
PCI: Enabling device 0000:02:02.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:02:02.0 to 64
eh0: Broadcom 4400 10/100BaseT Ethernet ff:ff:ff:ff:ff:ff
eth0: PHY Reset would not complete.
b44: eth0: BUG!  Timeout waiting for bit 80000000 of register 428 to
clear. (several times)

So, somehow, the MAC address is incorrect. I can ping my local IP
address, but nothing else. There is no way to get the network card back
to live, except rebooting. If I rmmod b44 *before* going to sleep, and
modprobing it after I resume, I'm getting the same faulty MAC address
and no network.


Kernel is 2.6.3-mm3; I have IO-APIC enabled. cat /proc/interrupts gives
me the idea that the network card uses PIC.

On Tue, 2004-02-24 at 07:41, Thorsten Zachmann wrote:
> Hello Len,




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click