From: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: Linus Torvalds <torvalds-3NddpPZAyC0@public.gmane.org>
Cc: Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
ACPI Developers
<acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: [BKPATCH] ACPI for 2.6
Date: 23 Mar 2004 05:02:12 -0500 [thread overview]
Message-ID: <1080036132.21687.310.camel@dhcppc4> (raw)
Hi Linus, please do a
bk pull bk://linux-acpi.bkbits.net/linux-acpi-release-2.6.5
A couple of key fixes in this batch.
Sync x86_64 up to i386.
SCI trigger/polarity fix
yenta interrupt fix
toshiba panic on 4G/4G fix
etc.
thanks,
-Len
ps. a plain patch is also available here:
ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.5/acpi-20040311-2.6.5.diff.gz
This will update the following files:
arch/x86_64/kernel/acpi/boot.c | 619 ------------------------
Documentation/kernel-parameters.txt | 6
arch/i386/kernel/acpi/boot.c | 172 +++++-
arch/i386/kernel/dmi_scan.c | 15
arch/i386/kernel/mpparse.c | 158 +-----
arch/i386/kernel/setup.c | 34 +
arch/ia64/kernel/acpi.c | 2
arch/x86_64/kernel/Makefile | 1
arch/x86_64/kernel/acpi/Makefile | 2
arch/x86_64/kernel/mpparse.c | 77 --
arch/x86_64/kernel/setup.c | 25
drivers/acpi/Kconfig | 1
drivers/acpi/bus.c | 40 -
drivers/acpi/numa.c | 11
drivers/acpi/pci_irq.c | 14
drivers/acpi/processor.c | 4
drivers/acpi/toshiba_acpi.c | 55 +-
drivers/char/sonypi.h | 1
include/acpi/acpi_bus.h | 2
include/asm-i386/acpi.h | 6
include/asm-i386/mpspec.h | 11
include/asm-ia64/acpi.h | 2
include/asm-x86_64/acpi.h | 3
include/asm-x86_64/mpspec.h | 2
24 files changed, 335 insertions(+), 928 deletions(-)
through these ChangeSets:
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/23 1.1608.1.52)
[ACPI] share i386/kernel/acpi/boot.c with x86_64
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/23 1.1608.1.51)
[ACPI] toshiba_acpi 0.18 from John Belmonte
add missing copyin
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/22 1.1608.1.50)
[ACPI] delete POWER_OF_TWO array (Pavel Machek)
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/22 1.1608.1.49)
[ACPI] ACPI SCI shall be level/low unless explicit over-ride
http://bugzilla.kernel.org/show_bug.cgi?id=1622
add "acpi_sci=edge" and "acpi_sci=high" manual over-ride
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/21 1.1608.1.48)
[ACPI] fix interrupts behind yenta cardbus bridge (David Shaohua Li)
http://bugzilla.kernel.org/show_bug.cgi?id=1564
<bjorn.helgaas-VXdhtT5mjnY@public.gmane.org> (04/03/21 1.1608.1.47)
[PATCH] clean up ACPI GSI/IRQ conversions (i386 part)
Add "acpi_gsi_to_irq()" as a generic replacement for
"acpi_irq_to_vector()".
This converts from an ACPI global system interrupt number to a Linux
IRQ.
Also, convert i386-specific terminology to use GSI when appropriate.
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/21 1.1608.1.46)
[ACPI] create disable_acpi()
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/18 1.1608.1.45)
[ACPI] numa.c build fix (Luming Yu)
http://bugzilla.kernel.org/show_bug.cgi?id=2131
<len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> (04/03/17 1.1608.1.44)
[ACPI] check "maxcpus=N" early -- same as NR_CPUS check.
http://bugzilla.kernel.org/show_bug.cgi?id=2317
When the BIOS enumerates physical processors before logical,
maxcpus=N/2 will now effectively disable HT.
This can be verified by boot messages warning that HT is off:
eg. "maxcpus=2" on a 2xHT system:
Total of 2 processors activated (11141.12 BogoMIPS).
WARNING: No sibling found for CPU 0.
WARNING: No sibling found for CPU 1.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
next reply other threads:[~2004-03-23 10:02 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-23 10:02 Len Brown [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-11-09 7:47 [BKPATCH] ACPI for 2.6 Len Brown
2004-11-12 17:42 ` Pavel Machek
[not found] ` <20041112174248.GA4267-u08AdweFZfgxtPtxi4kahqVXKuFTiq87@public.gmane.org>
2004-12-01 23:13 ` Len Brown
2004-10-09 5:54 Len Brown
2004-08-14 6:55 Len Brown
2004-08-14 20:56 ` Jesse Barnes
2004-06-21 19:41 Len Brown
[not found] <E1BbPIM-00044a-0A@sc8-sf-list2.sourceforge.net>
[not found] ` <E1BbPIM-00044a-0A-ek0oC1U1TqqnvZpeIfgr/KQD96bmaF075NbjCUgZEJk@public.gmane.org>
2004-06-19 21:22 ` Carsten Rietzschel
2004-06-18 6:42 Len Brown
[not found] ` <1087540933.4487.212.camel-D2Zvc0uNKG8@public.gmane.org>
2004-06-23 13:47 ` Stefan Seyfried
2004-05-20 19:12 Len Brown
2004-05-11 16:48 Len Brown
2004-05-03 16:52 Len Brown
2004-04-01 10:40 Len Brown
2004-03-30 1:26 Manpreet Singh
2004-03-30 0:28 Manpreet Singh
2004-03-29 17:32 Moore, Robert
2004-03-27 9:18 Manpreet Singh
2004-03-27 0:59 Len Brown
[not found] ` <1080349151.16211.33.camel-D2Zvc0uNKG8@public.gmane.org>
2004-03-27 11:11 ` Marcel Holtmann
2004-03-14 6:08 Len Brown
2004-03-06 6:37 Len Brown
2004-02-25 9:18 Len Brown
2004-02-14 4:46 Len Brown
2004-02-07 9:10 Len Brown
[not found] ` <1076145027.8682.34.camel-D2Zvc0uNKG8@public.gmane.org>
2004-02-09 9:09 ` Olaf Hering
2004-02-09 9:11 ` Olaf Hering
2004-01-27 6:03 Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1080036132.21687.310.camel@dhcppc4 \
--to=len.brown-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=torvalds-3NddpPZAyC0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox