public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
From: Herman Sheremetyev <mlists-6MNMYbGzEYJWk0Htik3J/w@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: No APIC interrupts after ACPI suspend
Date: Sun, 27 Jun 2004 14:49:19 -0400	[thread overview]
Message-ID: <1088362159.2163.38.camel@djinn> (raw)
In-Reply-To: <40DF0A98.9040604-CM5YN7r2dWBr4tq51QLIbdBPR1lH4CV8@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 3498 bytes --]

Hi All,

I'm having basically the same issue on my Asus M6N though with different
drivers.  I'm running Fedora Core 2 with a vanilla 2.6.7 kernel.  In my
case snd-intel8x0 and ipw2100, which both share IRQ 11, work ok for a
short while after an S3 resume but then freeze up and refuse to respond
until I unload and reload them.  I think the interrupts not incrementing
is just a symptom of the problem rather than the cause.  A reliable way
to reproduce it is to play music while either transferring a big file or
doing a ping -f.  This usually knocks them out pretty fast however it's
not at all consistent about the length of time they will work after a
resume.  

After reloading both of them, either one will work by itself but as soon
as I try to use them together both freeze again, and this time they
freeze pretty much immediately.  I noticed that PCI registers are set
differently after the machine comes back from S3 so I tried setting them
back manually but that did not fix the problem either.  There are some
that actually refused to be set so maybe that has something to do with
it.  I am attaching outputs of lspci -xxx and lspci -vv from a pre-S3
state and post-S3 if somebody thinks they might be helpful.  I also
tried alternate drivers for both devices (i810-audio and ndiswrapper)
with similar results.

Also, after an S3 resume, I only see 'inu' in yellow on black letters on
the screen, the ASM in wakeup.S is pretty impenetrable to me so I don't
know if this indicates a problem or not.  My laptop also does not reboot
properly after an S3, just hangs there after saying it's about to
restart, but again I'm not sure it that's related or not.

Thanks in advance for any help, and if I should provide any further
information please let me know.

-Herman

On Sun, 2004-06-27 at 13:57, Hamie wrote:
> Hamie wrote:
<snip>
> Nope... A fluke... Mostly...
> 
> FWIW the sound & networking appear to run fine for a while after 
> resuming. But I just started a DVD. It ran fine for about 30 seconds and 
> then the sound went. About 30 seconds later the video froze and the app 
> (xine) has frozen also. (kill -9 time...).
> 
> restarting xine it runs the viodeo for about 10 secs before freezing 
> again... With no sound...
> 
> Checking /proc/interrupts with juk running (Supposedly playing music)
> 
> hamish-ffMD+yyVbvkaXcDfM+S1Mg@public.gmane.org:~$ cat /proc/interrupts; sleep 10; cat /proc/interrupts
>            CPU0      
>   0:   10175817          XT-PIC  timer
>   1:       2077          XT-PIC  i8042
>   2:          0          XT-PIC  cascade
>   5:     169347          XT-PIC  Intel 82801DB-ICH4, yenta
>   8:          4          XT-PIC  rtc
>   9:      49257          XT-PIC  acpi
>  11:       8852          XT-PIC  yenta, uhci_hcd, uhci_hcd, uhci_hcd, 
> ehci_hcd, eth0
>  12:     110067          XT-PIC  i8042
>  14:      63045          XT-PIC  ide0
>  15:      38071          XT-PIC  ide1
> NMI:          0
> ERR:          0
>            CPU0      
>   0:   10185825          XT-PIC  timer
>   1:       2077          XT-PIC  i8042
>   2:          0          XT-PIC  cascade
>   5:     169347          XT-PIC  Intel 82801DB-ICH4, yenta
>   8:          4          XT-PIC  rtc
>   9:      49301          XT-PIC  acpi
>  11:       8857          XT-PIC  yenta, uhci_hcd, uhci_hcd, uhci_hcd, 
> ehci_hcd, eth0
>  12:     110586          XT-PIC  i8042
>  14:      63055          XT-PIC  ide0
>  15:      38071          XT-PIC  ide1
> NMI:          0
> ERR:          0


[-- Attachment #2: lspci.tar.bz2 --]
[-- Type: application/x-bzip-compressed-tar, Size: 4533 bytes --]

  parent reply	other threads:[~2004-06-27 18:49 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-25 10:48 No APIC interrupts after ACPI suspend Matthew Garrett
2004-06-26  0:05 ` Hamie
2004-06-26 16:42 ` [ACPI] " David Eriksson
2004-06-26 18:03   ` Hamie
     [not found]     ` <40DDBA7A.6010404-CM5YN7r2dWBr4tq51QLIbdBPR1lH4CV8@public.gmane.org>
2004-06-27 17:57       ` Hamie
     [not found]         ` <40DF0A98.9040604-CM5YN7r2dWBr4tq51QLIbdBPR1lH4CV8@public.gmane.org>
2004-06-27 18:49           ` Herman Sheremetyev [this message]
     [not found]             ` <1088362159.2163.38.camel-l85cmlzfk8I@public.gmane.org>
2004-06-29 21:19               ` Pavel Machek
2004-06-27 18:52           ` Alexander Gran
     [not found]             ` <200406272052.43326-qgpBcDF1kIxsXm07kNcISIFwBlHcXKVlHZ5vskTnxNA@public.gmane.org>
2004-06-27 19:16               ` Hamie
     [not found]                 ` <40DF1D22.2010406-CM5YN7r2dWBr4tq51QLIbdBPR1lH4CV8@public.gmane.org>
2004-06-27 20:27                   ` Hamie
2004-06-27 22:06                 ` [ACPI] " Karol Kozimor
2004-06-27 19:22               ` Alexander Gran
2004-06-27 16:27   ` [ACPI] " Matthew Garrett
  -- strict thread matches above, loose matches on Subject: below --
2004-06-28  6:20 Li, Shaohua
     [not found] ` <B44D37711ED29844BEA67908EAF36F032D566A-4yWAQGcml65pB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2004-06-28  8:48   ` Hamie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1088362159.2163.38.camel@djinn \
    --to=mlists-6mnmybgzeyjwk0htik3j/w@public.gmane.org \
    --cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox